1.
Radial-shrinkage mechanism of 18Ni Co-free maraging steel thin-wall pipes
![点击朗读](/dictall/images/read.gif)
18Ni无钴马氏体钢薄壁管径缩机理研究
2.
The ironing process with thinning in wall thickness and reducing in diameter
![点击朗读](/dictall/images/read.gif)
壁厚变薄直径缩小空心件的变薄拉深
3.
Influence of the shape of necking area on the necking of viscous medium by outer pressure
![点击朗读](/dictall/images/read.gif)
缩径区形状对粘性介质外压缩径成形的影响
4.
Study on the Compressibility of Alfalfa and Its Radial Compressing Force during Compressing;
苜蓿可压缩性及压缩过程中径向压缩力的测试研究
5.
Experimental Research of Thin-Wall Parts of Viarable Diamiter with Viscous Medium Outer Pressure Copression;
变径薄壁件粘性介质外压缩径的试验研究
6.
Influence of tube blank diameter on necking forming under outer pressure in viscous medium
筒坯直径对黏性介质外压缩径成形的影响
7.
Analysis of deformation in viscous medium outer pressure necking for thin-wall parts with variable diameter section
变径薄壁零件粘性介质外压缩径变形分析
8.
Minimal pressure drop if full-port selected
![点击朗读](/dictall/images/read.gif)
选择不缩径全流道结构时,压降最小
9.
CAD for the Evolve Drawing of Two-elbow with Positive Cone
![点击朗读](/dictall/images/read.gif)
正圆锥两节渐缩径弯头展开图cad
10.
SAR Raw Data Compression in Wavelet Domain
![点击朗读](/dictall/images/read.gif)
小波域的合成孔径雷达原始数据压缩
11.
The Improving Design of 100mm Bore Refrigeration Marine Compressor
![点击朗读](/dictall/images/read.gif)
船用100缸径制冷压缩机的改进研究
12.
The way to shorten the operating time of the arm of the punching robot
![点击朗读](/dictall/images/read.gif)
缩短冲压机器人手臂动作时间的途径
13.
Research of Several Algorithms for SAR Raw Data Compression;
![点击朗读](/dictall/images/read.gif)
合成孔径雷达原始数据压缩算法研究
14.
On the option of the economical channel in the transportation of uncompressable liquids;
![点击朗读](/dictall/images/read.gif)
不可压缩流体输送中经济管径的选取
15.
Fabrication and Compressive Properties of Al foam With Fine Cell Structure
![点击朗读](/dictall/images/read.gif)
小孔径泡沫铝的制备及压缩性能研究
16.
Performance Analysis of Data Compression Algorithms for Synthetic Aperture Radar
![点击朗读](/dictall/images/read.gif)
合成孔径雷达数据压缩算法性能分析
17.
Necking Cause Analysis and Countermeasure of Strait International Convention and Exhibition Center
海峡会展冲孔桩缩径成因分析与对策
18.
The specified path is too long [2]. Shorten one or more portions of the path name and try again.
指定的路径太长 [2]。请缩短路径名的一个或多个部分,然后重试。