1.
Distribution of Dynamic Axis Load of Vehicle Braking
关于汽车制动的动态轴载荷分配的研究
2.
The method of load distribution of bottom bracing is adopted to change support rigidity,so that the bush vibration is reduced.
采用底脚载荷分配的方法改变了支承刚度 ,从而降低了轴瓦振动。
3.
Load analysis of cylindrical roller bearing with inclined axis
圆柱滚子轴承轴线倾斜时的载荷分析
4.
The Dynamic Load Distribution and the Estimated Fatigue Life of the Axles on Double Deck Passenger Cars
双客车轴动载荷分布与疲劳寿命估算
5.
Simulation and Analysis of Loads on Cutting Head of Horizontal Roadheader
横轴式掘进机截割头载荷的模拟分析
6.
Calculation of Preload Coefficient of Matched Angular Contact Ball Bearing Sets
多联组配角接触球轴承的预载荷系数计算
7.
Study on Load Analysis Method for Diesel Engine Crankshaft Main Bearing Based on ADAMS;
基于ADMAS的柴油机曲轴主轴承载荷分析方法研究
8.
Load distribution analysis in a single row four-point-contact slewing ring
单排四点接触球转盘轴承的载荷分布分析
9.
Optimization of Load Distribution of Vibration Isolation System of Air-spring;
空气弹簧隔振系统载荷分配优化研究
10.
STUDY OF THE LOAD ON THE JOURNAL BEARINGS OF THE TRICONE BIT BY THE METHOD OF ANALYSIS OF THE RANDOM PROCESS
用随机过程分析方法研究牙轮钻头轴承载荷
11.
Analysis and Calculation about Axial Load of Rotate Shoulder Connection;
旋转台肩连接螺纹轴向载荷分析与计算
12.
Effect of Notch Parameters of Round Shaft on Stress Distribution under Torsion
扭转载荷下缺口参数对圆轴应力分布的影响
13.
Finite element analysis of PVC coated biaxial warp knitted fabric under multiaxial loads
多向载荷下PVC双轴向经编织物有限元分析
14.
Finite element simulation of PVC coated biaxial warp knitted fabric under biaxial loads
双向载荷下PVC涂层双轴向经编织物有限元分析
15.
The Dynamic Characteristics Analysis for the Load-sensor in the Rotor-bearing System
转子系统轴承载荷传感器动态特性分析
16.
Analysis of the Performance of Half Rigid Road Under Three-Axle Vehicle Moving Loads
三轴移动载荷对半刚性路面性能影响分析
17.
Research on the Model of Blade Bearing Loads of the Wind Turbine
风力发电机桨叶轴承载荷分析模型的研究
18.
The Stress Analysis of Hub Bearing Based on Multi-bench Test Load
基于多工况台架试验载荷的轮毂轴承受力分析