1.
Initial discussion on application of steel rolling straight thread sleeve connection technology
浅谈钢筋滚压直螺纹套筒连接技术应用
2.
The application of the reinforcing peel rib to roll press straight screw thread sleeve connection technique in bridges
钢筋剥肋滚压直螺纹套筒连接在桥梁中的应用
3.
EXPERIMENTAL STUDY ON THE PROPERTIES OF REBAR PARALLEL THREAD SLEEVE JOINT
钢筋滚轧直螺纹套筒连接性能试验研究
4.
Application of the Collet Connection Technology for Pell off The Ribs and Rolling Plain Bar in Hot-Rolled Swirl Pool Project of Masteel 2250mm Hot Strip Mill While Against Construction;
钢筋剥肋滚轧直螺纹套筒连接技术在马钢新区热轧旋流池逆作施工中的应用
5.
The technology of the reinforced parallel thread coupler splicing of rebars and construction control
钢筋直螺纹套筒等强连接技术及其施工控制
6.
Sleeve 1;Sleeve 2;Screwed sleeve 1;Screwed sleeve 2
套筒 1;套筒 2;螺纹套筒 1;螺纹套筒 2
7.
Application about the technology of thick reinforcing bar equal strength peeling ribs rolling direct whorl linking in Zhongguancun science and technology mansions engineering;
粗钢筋等强度剥肋滚压直螺纹连接技术在中关村科技大厦工程中的应用
8.
Application of rib-stripped rolling straight thread connection technology in face-slab rock fill dam
钢筋剥肋滚轧直螺纹连接技术在面板堆石坝中的应用
9.
Fixture straight screwconnection technology in the engineering
钢筋直螺纹连接技术在工程中的应用
10.
Design and manufacture of hight pressure seal thread socket with large ddameter and big pitch
大直径大螺距高压密封螺纹套管设计与制造
11.
Application of water proof cold forging steep screw steel connection in metro station
防水冷镦直螺纹钢筋连接在地铁车站中的应用
12.
Machine Conjunction-Quantity Control of Construction Main Points of Straight Thread Steel Bar
机械连接—直螺纹钢筋施工要点质量控制
13.
The Study of the Small Diameter Cold-Roll Twisted Steel's Production Quality Control
小直径冷轧螺纹钢筋的产品质量控制研究
14.
Align the bushing with the spring eye or shackle eye and tighten the nut at the socket wrench end of the threaded roTighten until the bushing is forced into the spring eye.
将衬套对准弹簧眼或U型钩眼，并在螺纹杆的套筒板手末端锁紧螺帽。锁紧直到衬套进入簧眼。
15.
These rolls are corrugated cylinders, usually of the spiral type.
粉碎辊是波纹式滚筒，还常是螺旋割纹式。
16.
Research on the formation of dimensional chain when thread hob rolls thread by axial intake on doubleroller machine;
双滚柱机床螺纹滚头轴向进给滚压螺纹时形成尺寸链的分析
17.
There are lots of advantages by cold extrusion for straight knurlnut in a single process.
直纹滚花螺母采用冷挤压一次成形新工艺，成效显著。
18.
Abstract: There are lots of advantages by cold extrusion for straight knurlnut in a single process.
文摘:直纹滚花螺母采用冷挤压一次成形新工艺，成效显著。