1.
Technology and quality control is closely related with the quality of prototype trial-prduction of relay protection product.
工艺技术及质量管理与继电保护产品样机试制的质量密切相关。
2.
advanced development
试制 -样机或样品
3.
The Study on the Mechanical Design and Control System of Metallographic Sample Polishing Machine;
金相试样抛光机的机械设计与控制系统的研究
4.
The Mechanical Design of the Metallographic Sample Cutting Machine and the Study on Its Controlling System;
金相试样切割机的机械设计与控制系统的研究
5.
Sampling and Control System of a Test Bed for Simulating Engine Dynamic Performance
发动机动态性能模拟试验台的采样与控制系统
6.
The Study on the Metallographic Sample Cutting Machine Controlled Based on PLC;
基于PLC控制的大型金相试样切割机的研究
7.
Design of Supporting Software for NMT Experimental Prototype;
非正交多重调制技术试验样机的支持软件设计
8.
Research about Virtual Prototyping Used for Control System;
用于控制系统调试用的虚拟样机的研究
9.
PROTOTYPE EXPERIMENT STUDY ON DIFFEERENT INGREDIENT-PROPORTION OF REFRIGERATION IN AUTO-CASCADE REFRIGERATOR
自动复叠制冷样机混合工质不同配比的试验
10.
The software developing for the Electromagnetism Design of motor in Driving the Fluid Machinery and the Prototype Test;
拖动流体机械电动机电磁设计软件研制及样机试验
11.
Rock failure mechanism and true triaxial experimental study of specimens with single structural plane under three-dimensional stress
三向应力状态下单结构面岩石试样破坏机制与真三轴试验研究
12.
Design of Double-Ring Planetary Indexing Cam Mechanism and Experiment of Prototype;
双环式行星分度凸轮机构的设计与样机的试制和实验
13.
The Bare Printed Circuit Board Tester s Hardware Design and Prototype Developing Based on Field Programmable Gate Array;
基于FPGA的电路板光板测试机硬件设计与样机研制
14.
The Study on the Control System of the Metallographic Sample Cutting Machine Controlled Based on PLC;
基于PLC控制的大型金相试样切割机控制系统的研究
15.
To make a sample impression of(type).
试印制作（印版）的样品版
16.
Synthetic rubbers--Specimen preparation
GB6735-1986合成橡胶试样制备
17.
The experimental results indicate that the DDI system is reliable and feasible for the studied IC engine prototype.
样机试验结果表明所研制的数字直接点火系的方案可行、性能可靠。
18.
And now, this system has been successfully completed, and has been taking part in Chinese HDTV Function Prototype System Test since Oct., 2001.
目前，该控制系统已顺利完成，并参与北京、上海两地的功能样机测试。