1.
Influence of backward extrusion punch shape to the extrusion process
反挤压凸模形状对挤压成形工艺的影响
2.
Cold Extrusion Process and Die Design of Cups with Bosses
圆形凸台件的冷挤压工艺及模具设计
3.
The Study on the Failure Formals and the Extension Life Methods of the Extrusion Punch
冷挤压凸模失效形式及延寿方法研究
4.
A Technique of Isothermal Extrusion Pre-forming and Optimization of Mould Structure for Globoidal Indexing Cams Parts;
弧面凸轮等温挤压预成形工艺与模具结构优化
5.
Numerical Design of Die Bearing for Extrusion of Aluminum Shape
铝型材挤压模工作带形状的数值设计
6.
Simulation and Optimization of Globoidal Cam Isothermal Extrusion Forming by 3D Rigid-Visco-Plastic FEM
弧面凸轮等温挤压成形刚粘塑性三维有限元模拟与优化
7.
Nut Shaping Analysis of Heat Opposite Direction Extrusion and Die Design
热反挤压六角螺母成形分析及模具设计
8.
Macro-micro Coupled Simulation of Positive and Negative Extrusion for Universal Joint Fork
万向节叉正反挤压成形的宏微观耦合模拟
9.
FEM simulation of backward extrusion process of TB10 titanium alloy cylinder
TB10钛合金筒体反挤压成形的有限元模拟
10.
To shape(a plastic, for instance) by forcing it through a die.
挤压出用一模子把（如塑料等）挤压成形
11.
die ,for relief printing for stamping
凸版印模感压凸印模
12.
By use extrude granulator to make soft material into strip granules.
软材通过挤压制粒机制成条形状颗粒。
13.
Hot extrusion in AZ31 distortion magnesium alloy research present situation
热挤压在AZ31变形镁合金中的研究现状
14.
The Numerical Simulation of Flange Bending Part in Hydraulic Rubber Forming;
凸弯边零件高压橡皮成形的数值模拟
15.
FE Simulation of 2017 Alloy during the Semi-Solid Backward Extrusion;
铝合金半固态反挤压过程的数值模拟
16.
Numerical Simulation of the Spur Gear Extrusion Shaping Under Different Forms of Dies
不同凹模形式下直齿轮挤压成形数值模拟研究
17.
Numerical Simulation of Metallic Flow Forming via Extrusion in Pocket and Porthole Dies
导流模和分流模金属挤压流动成形的数值模拟
18.
Study on Near-net-shape Hot-pressing of Mg Extruded Preform
镁合金挤压预成形坯模压近终成型工艺研究