1.
Measurement of Edge Straightness Based on Fraunhofer Diffraction
基于夫琅禾费衍射的刀口直线度检测
2.
Straightness measurement uncertainty evaluation for straight edge's working edge
刀口尺工作棱边直线度测量不确定度评估
3.
involute milling cutter for straight bevel gear
直齿伞齿轮渐开线铣刀
4.
Three diameters of straight pipe are required on the valve outlet.
阀门出口处需要配置三倍直径长度的直线管路。
5.
Study on the Measurement of Roundness and Straightness for the Inner Hole of the Large Diameter Long Pipes;
大口径长管内孔的直线度、圆度测量研究
6.
Application of Linear Profile to Curve Edge Grinding of Cutter Blade
直线形靠模在曲线刀片刃磨中的应用
7.
Vertical mammaplasty for correction of severe breast ptosis
乳房重度下垂的直线切口法乳房成形术
8.
The confirmation of transitional curviline on involute gear root is expatiated, and the designing method with CAD for finger milling-cutter templet is discussed.
用微机辅助设计齿轮刀具样板,速度快,数据准确,并能直接绘制样板曲线图形。
9.
Calibration of 0 class knife-edge and uncertainty evaluation
0级刀口尺的检定及其不确定度评定
10.
A cutting tool is wear-resistant if it resists abrasion at the cutting edge and along the tool face. Wear resistance improves as cutting tool hardness increases.
如果切削刀具的刃口和刀面耐磨,刀具就不易磨损。切削刀具的硬度越高,耐磨性就越好。
11.
Discussion about the Continuity of Arc-shaped Curve of Ball-end Milling Cutting
等螺距圆弧形球头铣刀刃口曲线的连续性讨论
12.
Arc-shaped Curve of Ball-end Milling Continuity
柱状球头回转铣刀的等螺距刃口曲线研究
13.
cut-throat razor
ph.1. 直柄剃刀,开式剃刀
14.
Thickness or diameter, as of sheet metal or wire.
直径，厚度金属板的厚度或线的直径
15.
Don't mess around with sharp knives!
不要摆弄刀口锋利的刀！
16.
He nicked the razor.
他弄缺了剃刀刀口。
17.
verticql temperature profile radiometer
温度铅直廓线辐射仪
18.
Measurement of departures from straightness
GB/T11336-1989直线度误差检测