1.
On the differences between the fire-resistant cable and the fire-resistant enclosed busbar
谈耐火电缆与耐火封闭母线的区别与应用
2.
enclosed type fireproof glass reinforced plastic lifeboat
封闭式耐火玻璃钢救生艇
3.
Model Selection of Large Current Enclosed Bus-bar for Nuclear Power Unit
核电机组大电流离相封闭母线的选型
4.
The current transformer is fully enclosed and busbar structure. The secondary windings and iron core are insulated by epoxy resin. It has a good ability of antipollution and moisture proof.
本型电流互感器为全封闭母线式结构，二次绕组及铁芯均浇注在环氧树脂内，耐污染及潮湿。
5.
Care must be taken to completely seal entrance plugs(eg. at a manway)in refractory linings.
必须小心地完全封闭耐火材料衬里的进口门。
6.
The Analyses of Isolated Phase Bus and the Development of Simulation Software;
离相封闭母线场域分析及仿真软件开发
7.
The Structure Design and Analysis of Large Current Continous Enclosure Type Isolated-phase Bus;
大电流全连离相封闭母线的结构设计与分析
8.
Study on the Design of the Measurement and Control System of a DC-Bus Electrically Closed Gearbox Test-bench;
直流母线电封闭变速箱试验台测控系统的设计
9.
Research of closed insulation relay JMX-5 type of the small bus terminal
全封闭绝缘JMX-5型继电保护小母线端子的研究
10.
Application of Forced Air Cooling Isolated-phase Bus to Ling'ao Nuclear Power Station
风冷式封闭母线在岭澳核电工程中的实践
11.
pressurized stopping
封闭灾区加压隔火墙
12.
Study of Three-Dimensional Field Simulation Analysis and Structure Optimum Design for Long Vertical Forced-Air Isolated-Phase Bus
高垂直段风冷封闭母线三维场仿真分析及结构优化设计
13.
A Brief Discussion on Installation and Operation of Enclosed Bus Light Positive Pressure Equipment for Underground Plant
浅谈地下厂房封闭母线微正压装置的安装与运行
14.
Influence of the Defect of Porcelain Insulator for Supporting IPB on the Insulation Tests of Generator Stator Winding
封闭母线瓷支撑绝缘子缺陷对机组定子绕组绝缘测量的影响
15.
Application of 6～10kV Complete Pour Enclosed Busbar of inorganic Mineral Materials in the Desulfuration System of a Big Power Sation
6～10kV全浇注无机矿物质封闭母线在大型发电厂脱硫系统中的应用
16.
Ultrasonic Testing and Defect Positioning for Welded Joints of Aluminum Enclosed Busbar
铝制封闭母线焊接接头的超声波检测方法及缺陷定位
17.
closed linear model of production
封闭式的线性生产模型
18.
Cause Analysis and Treatment of Overheated Enclosed Bus Expansion Joint of 1# Generator-Transformer Unit at Power Station of Changzhou Hydraulic Complex
长洲水利枢纽电站1号发变组封闭母线伸缩节过热原因分析及处理