1.
Principle and Troubleshooting of FPD Cooling Unit for DSA System
平板DSA的平板冷却单元原理与温度传感器故障维修
2.
terminal heating & cooling units
终端加热和冷却单元
3.
Drain cooling system (refer to Group 7, Cooling System).
排干冷却系统（见单元7-冷却系统）。
4.
Renstall the radiator and condenser unit in the vehiclRefer to Group Cooling System for the procedures.
重新安装散热器和冷却器单元到车辆上。程序，见单元7-冷却系统。
5.
Finite element analysis of cement cooler grate plate based on ANSYS
采用ANSYS的水泥冷却机篦板有限元分析
6.
FLUID-THERMAL COUPLING SIMULATION OF FLAT PLATE FILM-COOLING AT HIGH TEMPERATURES
高温平板气膜冷却流热耦合数值模拟
7.
Remove serpentine drive belt, refer to Group Cooling.
拆下蛇型驱动皮带，请参阅单元7-冷却。
8.
Fill cooling system (refer to Group 7, Cooling System for the proper procedure).
注入冷却系统（有关正确程序请参阅单元7，冷却系统）。
9.
3-D FEM simulation of hot-leveling and cooling process of heavy plate
宽厚板热矫直和冷却过程的三维有限元模拟
10.
Numerical Analysis of Heat Transfer Coefficient in Water Spray Cooling Process of High Temperature Flat Plate
高温平板水雾冷却换热系数的数值分析
11.
Install accessary drive belt (refer to Group 7, Cooling).
安装附属的驱动皮带（请参阅单元7，冷却）。
12.
THE MULTIFORM DESIGN OF CHINA CIVIL CONSTRUCTION TYPE OF SINGLE-SIDE-COLOUR-STEEL SHEET ASSEMBLED COLD STORAGE
中国土建式单面彩钢板组装冷库的多元化设计
13.
orificing the coolant
对冷却剂加孔板节流
14.
Liquid Crystal Thermography and Its Application in Film Cooling on Flat Plate;
热敏液晶测温技术及其在平板气膜冷却实验中的应用
15.
spent fuel cooling system
辐照燃料元件冷却系统
16.
cooling irradiated fuel element
冷却辐照的燃料组元
17.
To read DTC's and to obtain cooling system data, refer to Group 25, Emission Control Systems for proper procedures.
为阅读DTC并获得冷却系统资料，详情请参阅单元25，排放控制系统。
18.
Influence of Structural Parameters of Air-cooling Platform on Heat Exchange Efficiency of the Air-cooling Unit
火电厂空冷平台结构参数对空冷单元换热的影响