1.
Lower and Upper Orientable Strong Radius and Diameter of Cartesian Product of Paths
![点击朗读](/dictall/images/read.gif)
路和路的笛卡尔积的最小和最大定向强半径和强直径(英文)
2.
maximum opening diameter without reinforcement
![点击朗读](/dictall/images/read.gif)
不另行补强的最大孔径
3.
The expansion and radial spread of cortex and pith cells are very strong after the mid-dle stage.
中期以后直至成熟,皮层和髓细胞强烈扩大、径向伸长。
4.
The diameters of the rotor and the stator are limited by mechanical stresses.
![点击朗读](/dictall/images/read.gif)
转子和定子的直径受到机械强度的限制。
5.
Using matrix theory, we present a sharp upper bound on the spectral radius of digraphs and strongly connected diagraphs.
利用矩阵理论,给出了简单有向图的谱半径可达上界和强连通有向图的谱半径上界。
6.
full diameter radial permeameter
![点击朗读](/dictall/images/read.gif)
大直径径向渗透率仪
7.
Analysis of High-strength Bolt Group Splicing with Vertical Flange in Big Diameter Tower-silo
大直径塔筒纵向法兰连接中高强螺栓群受力情况研究
8.
Diameter, Tolerance and Tensile Strength
![点击朗读](/dictall/images/read.gif)
直径,公差及拉力强度
9.
TUBE DIAMETER SHALL BE WITHIN 10% OF NOMINAL DIAMETER WITHIN BEND RADIUS.
![点击朗读](/dictall/images/read.gif)
管直径须在直径理论值和折弯半径的10%以内。
10.
radial gap of double-cone ring
![点击朗读](/dictall/images/read.gif)
双锥环的最大半径间隙
11.
maximum reach at ground level
![点击朗读](/dictall/images/read.gif)
停机面最大挖掘半径
12.
All sharp corners to have 0.01 Max. Radii.
![点击朗读](/dictall/images/read.gif)
所有尖角最大半径0.01
13.
ALL INSIDE CORNERS TO BE .38 RADIUS MAX
![点击朗读](/dictall/images/read.gif)
所有内角最大半径0.38
14.
On Autofrettage When Mean Radius as the Radius of the Plastic Zone
![点击朗读](/dictall/images/read.gif)
以平均半径为塑性区半径时自增强问题的研究
15.
The diameter of Mars is slightly over half that of the earth.
![点击朗读](/dictall/images/read.gif)
火星的直径比地球的半径稍大些。
16.
On principles and methods of fostering the honesty virtue of university students;
![点击朗读](/dictall/images/read.gif)
论加强大学生诚信教育的原则和途径
17.
Teacher: What's the relationship between the radius and the diameter of the same circle?
![点击朗读](/dictall/images/read.gif)
师:直径的长度和半径有什么关系?
18.
Sintered metal bushes--Determination of radial crushing strength
![点击朗读](/dictall/images/read.gif)
GB/T6804-1986烧结金属衬套径向压溃强度测定法