1.
INFLUENCE OF SINTERING TEMPERATURE ON STRUCTURE AND PROPERTIES OF INJECTION MOLDED Cr-Mn-Mo-N STAINLESS STEEL PARTS
烧结温度对注射成形Cr-Mn-Mo-N不锈钢零件组织与性能的影响
2.
The Hot Deformation Behavior and Hot Processing Map of Cr-Mn-Ni-Cu-N Austenitic Stainless Steel
Cr-Mn-Ni-Cu-N奥氏体不锈钢热变形行为及热加工图
3.
Microstructure and Properties of C-Si-Mn-Cr(Mo) Cold Rolled DP980 Steels
C-Si-Mn-Cr(Mo)系980MPa级冷轧双相钢的组织性能研究
4.
Beheviour of a Cr-Mn-N Austenitic Steel under Cold and Hot Deformation Conditions;
一种Cr-Mn-N奥氏体钢在冷、热变形条件下的行为
5.
Discussion of the Spot Welding About Different Kinds of Cr-Mo Ste el;
不同Cr-Mo钢现场焊接工艺探讨
6.
Successive Determination of Cr,P,Mn,Ni,Mo in High Chromium Cast Iron
高铬铸铁中Cr、P、Mn、Ni、Mo的连续测定
7.
Research of hardfacing material of impact wear-resistance with Fe-Mn-Cr-Mo-V alloy system
Fe-Mn-Cr-Mo-V系抗冲击磨料磨损堆焊材料的研制
8.
Effects of Mn on Mechanics Properties of 20Cr-18Ni-6Mo Austenitic Stainless Steel
Mn元素对20Cr-18Ni-6Mo奥氏体不锈钢力学性能的影响
9.
Studies of Electroplating Fe-Ni-Cr Imitated Stainless Steel Alloy Coating;
电沉积Fe-Ni-Cr仿不锈钢合金镀层的研究
10.
Effect of Cr on Property of Stainless Steel Joint Brazed with Series Ni-P Filler Metal
Cr对Ni-P系钎料钎焊不锈钢接头性能的影响
11.
Development of Ferritic Stainless Steel with 15% Chromium for Automobile Exhaust System
用于汽车排气系统的15%Cr铁素体不锈钢的开发
12.
Experimental Analysis on Direct Recycling Cr-Ni Stainless Steelmaking Dust in EAF
电炉直接利用Cr-Ni不锈钢除尘灰的试验分析
13.
Corrosion Resistance of Superpurity Austenitic Stainless Steel in Boiling Nitric Acid Containing Cr~(6+)
沸腾稀硝酸中Cr~(6+)对高纯不锈钢耐蚀性的影响
14.
On the Diophantine Equation x~m+y~n=mn(m≥n,m,n∈N);
关于不定方程x~m+y~n=mn(m≥n,m,n∈N)
15.
Study on the Strain Induced Transformation of Cr-Mo Steels;
Cr-Mo低合金钢形变诱导相变规律研究
16.
Effect of Heat Treatment on Hardness of Iron-based Cr-Mo-W-Mn-Ni Alloy Surfacing Layer
热处理对Cr-Mo-W-Mn-Ni铁基合金堆焊层硬度的影响
17.
Effect of (Graded) (Ti,Al)N Coating on Fatigue Behavior of Stainless Steel Material;
（梯度）（Ti，Al）N涂层对不锈钢基材疲劳性能的影响
18.
Development and Application of Cr-Mo Gear Steel for Automobile;
载重卡车用Cr-Mo系列齿轮钢的开发与应用