1.
But a camshaft driven directly by the crankshaft gear turns in the opposite direction.
但是凸轮轴被曲轴齿轮直接驱动，其将在相反方向上转动。
2.
Design of the crankshaft pulley signal plate dedicated CNC milling machine
曲轴皮带轮信号盘数控铣齿专机设计
3.
twin-input single-output gear
双主动齿轮单出轴齿轮
4.
hyperboloidal gear
双伞齿轮，双曲面齿轮
5.
When the gears are engaged, the crankshaft keeps the car moving.
而曲轴，在齿轮箱挂挡时，又使汽车持续运动。
6.
gear type coupling
齿式联轴器齿轮联结
7.
curve-tooth bevel gear
弧齿伞齿轮，曲线齿锥齿轮
8.
Design and Curve Fitting for Axial Profile of Basic Worm of Planetary Cycloidal Gear Hob
行星摆线齿轮滚刀基本蜗杆轴向齿形设计与曲线拟合
9.
reverse idler gear shaft bearing
回动空转齿轮轴轴承
10.
Thus a normal loom has two shafts. The main shaft(crankshaft or top shaft) drives the lay mechanism and is geared to another shaft which operates at half of the speed of the crankshaft.
这样,普通织机应具备两根轴,主轴(曲拐轴或位于上部的轴)驱动筘座并通过齿轮驱动另一根轴。
11.
cam shaft driving gear
凸轮轴传动齿轮凸轮轴传动装置
12.
crankcase cam gear bushing
曲轴箱凸轮传动轴衬套
13.
twin-pinion single-output reduction gear
双主动齿轮单出轴减速齿轮
14.
Bevel gears: gears which connect two shafts at right angles.
伞齿轮:连接直角相交两轴的齿轮。
15.
The pinion gear is on the same shaft as the motor armature and rotates at the same speed.
小齿轮如马达电枢般在同一曲轴上，且以相同的速度转动。？
16.
A Crankshaft Fluctuation Sensor (CKF) is located near the bottom of the timing cover where it generates a signal as the crankshaft timing chain sprocket rotates past it.
曲轴位置传感器安装在定时器壳底部附近，产生一个曲轴定时链轮齿通过的信号。
17.
parallel axis gear
平行轴传动减速齿轮
18.
spiral bevel gears with offset axes
轴线偏置螺旋伞齿轮