1.
Ultimate Axial Compression Ratio for Reinforced Confined Concrete Columns;
区域约束混凝土柱轴压比限值的研究
2.
Study on Limit Value of Axial Compression Ratio of Steel Reinforced High Strength Concrete Column;
型钢高强混凝土柱轴压比限值的研究
3.
Study on Limited Value of Axial Compression Ratio of Steel Reinforced High Strength Concrete Column;
型钢高强混凝土柱轴压比限值的试验研究
4.
INFLUENCE OF THE CHARACTERISTIC VALUE OF STIRRUP CONTENT IN BOUNDARY ELEMENTS ON ALLOWABLE AXIAL LOAD RATIO FOR CONCRETE STRUCTURAL WALLS
边缘约束构件配箍特征值对剪力墙轴压比限值影响的分析
5.
Experimental Study and Theory Analysis on Limit Value of Axial Compression for SRHSHPC Columns;
型钢高强高性能混凝土柱轴压比限值试验研究与理论分析
6.
Research on Bearing Capacity of Normal Cross Section and Axial Compression Ratio of SRC Special-shaped Columns;
型钢混凝土异形柱正截面承载力及轴压比限值的研究
7.
The Limit Value of Axial Compression Ratio of Reinforced Concrete Special-Shaped Columns;
T形、十字形截面柱翼缘对轴压比限值影响的讨论
8.
Discussion on axial load ratio limits of circular steel tube columns filled with steel-reinforced concrete;
关于钢骨-钢管混凝土组合柱轴压比限值问题的讨论
9.
THE STUDY ON THE ALLOWABLE AXIAL LOAD RATIO OF CONCRETE SHEAR WALL WITHOUT CONFINED BOUNDARY ELEMENTS
无约束边缘构件混凝土剪力墙的轴压比限值研究
10.
Unified Analysis of Limiting Width-Thickness Ratio of Plate Elements in Axially Compressed Members
轴心压杆板件宽厚比限值的统一分析
11.
Theoretical and Test Studies on Width to Thickness Ratio Limitation of Cut T-shape Web Subject to Axial Compression;
部分T型钢轴压杆腹板宽厚比限值试验与理论的研究
12.
Studies on Width to Thickness Ratio Limitation of High Strength(Q460) Equal-leg Angle Members under Axial Compression
Q460高强角钢轴压杆肢件宽厚比限值试验与理论研究
13.
Research and Finite Element Analysis on Load Carrying Capacity of Square Studs with Diaphragm in Websteel System
无比钢蒙皮支撑四方柱轴压性能研究和有限元分析
14.
Finite element contrast analysis for the reinforced concrete column and the steel encased concrete column under the axial compression
轴心受压钢筋混凝土柱与外包钢柱有限元对比分析
15.
1. Choose a Compression Ratio and Threshold Value.
选择一个压缩比率和一个初始限额值threshold。
16.
Axial Thrust Numerical Calculation Compared with Expenimental Result of High Pressure Pump for Seawater Desalination
海水淡化用高压泵轴向力数值模拟计算与试验对比
17.
The correlation between the compressive strength and axial tensile strength of RCC with placing joint and ultimate tensile strain of placing joint of RCC layers have been obtained.
通过试验研究给出有层面碾压混凝土抗压强度、面轴拉强度与层面极限拉伸值间相关关系。
18.
Balance experiment of power loss of running-in bearing and hydrodynamic-hydrost-atic bearing
跑合轴承与动静压轴承功耗对比试验