1.
Finite Element Analysis of Pile Clamping Box of Hydraulic Static Pile Driver
液压静力压桩机夹桩箱的有限元分析
2.
The Analysis of Cantilever Strength of ZYB600F Hydraulic Static Pile Engine Base on Cosmos;
ZYB600F型液压静力压桩机悬臂强度的分析
3.
Pile clamping mechanism of hydraulic static pile driver based on ANSYS
液压静力压桩机夹桩机构的有限元分析
4.
Static Strength Finite Element Analysis to the Cantilever of the ZYB Hydraulic Static Pile Drivers;
ZYB液压静力压桩机悬臂强度有限元分析
5.
hydrostatic extrusio
静水压挤压;静水压挤压;静液力挤压;静液力挤压;液力静挤压
6.
The application of static hydraulic concrete prestressed pile in highway engineering
静力液压混凝土预应力桩在公路工程中的应用
7.
Study on Mechanism and Resistance in the Process of Driving Pretest Piles;
预压托换桩的压桩机理与压桩阻力研究
8.
Design of a Dynamic Numerical Display System for Leveling Angle of Static Pile Driver
静力压桩机调平倾角动态数字显示系统的设计
9.
Experimental Study of Set-up Mechanisms of Bearing Capacity of Jacked-in Piles;
静压桩承载力时间效应机制的室内试验研究
10.
Comparison of several calculation methods of static pressure pile sinking resistance pressure
几种计算静压桩沉桩阻力方法的比较
11.
Study on estimating method of static jacked resistance of precast piles;
粉砂土地区静压预制桩压桩阻力的预估和研究
12.
Study of Sinking-resistance and Compaction Effect of Static-press Pile;
静压桩施工沉桩阻力及沉桩挤土效应研究
13.
isostatic presses (cold and hot)
等静压压力机(冷压和热压)
14.
Experiments of Driven Pile Control for Static Pressure on PHC Pipe Pile
静压式预应力高强度混凝土管桩沉桩控制压桩力的试验分析
15.
The Electro-hydraulic Design of Hydraulic Hammer for Highway Guardrail
公路护栏桩液压打桩机机电液一体化设计
16.
hydraulic engine
水力(液压)发动机
17.
Quality control of the static pressed pile of high strength prestressed concrete pipe pile
高强度预应力混凝土管桩静力压桩的质量控制
18.
Analysis on Dynamic and Static Test of Vertical Load Capacity
基桩竖向抗压承载力动静试验的分析