1.
The Theory of Finite Deformation and Its Application in Geotechnical Engineering
有限变形理论及其在岩土工程中的应用
2.
A Study on Finite Deformation Elasto-Plastic theory and numerical methods of continuum、Beam and Shell;
二、三维实体及梁板壳弹塑性有限变形理论与算法研究
3.
Analytical Analysis on One-dimensional Finite Strain Nonlinear Consolidation of Saturated Soft Clay;
饱和软粘土一维有限变形固结理论的解析分析
4.
Study on Finite Element Simulation of Distortion Due to Milling Process for Aerospace Monolithic Components;
航空整体结构件铣削加工变形的有限元模拟理论及方法研究
5.
Study of Mechanical Behavior and Application of Single Crystal Superalloy Base on Finite Deformation Crystallographic Theory;
基于有限变形晶体滑移理论的单晶力学行为及应用研究
6.
Finite element formulation for finite deformation problem based on complementary energy principle
基于余能原理的有限变形问题有限元列式
7.
Study on Finite Strain Consolidation Theory under Osmotic Pressure;
渗压作用下的有限应变固结理论研究
8.
Variational Principles with Mixed Variables in Theory of Elasticity with Finite Displacement;
有限位移弹性理论混合变量的变分原理
9.
Study of Critical Theory about Buckling Forming of Middle Thick-walled Tube Bearing Axial Load;
中厚壁圆管轴压屈曲极限变形理论研究
10.
Research on Theory and Application of 3D GUBET for Sintered Powder Metallurgy Materials;
烧结材料三维变形广义上限元理论与应用研究
11.
Abstract: In this paper, the generalized variational principle of ela stic and plastic problem with finite displacement is derived by means of semi-in verse method.
文摘:利用半反推法，导出了弹塑性有限变形率形式的广义变分原理.
12.
Study on the Finite Element Method Based on the Complementary Energy Principle for Large Elastic Deformation;
基于弹性大变形余能原理的有限元法研究
13.
The Finite Element Analysis of Metal Diaphragm Deformation for Propellant Management Device
推进剂管理用金属膜片挤压变形有限元分析
14.
Finite element analysis on deformation mechanism of soils under percussion-compact
冲击挤密作用下土体变形机理的有限元分析
15.
The cone penetration process is numerically simulated by using the large-strain finite element method and a simple theory of interface.
采用大变形有限元和简单的接触面理论,数值模拟了静力触探的探入过程.
16.
Theoretical and Numerical Study on Springback Prediction in Sheet Metal Forming;
板料冲压成形回弹理论及有限元数值模拟研究
17.
The Finite Element Analysis of the Crane box-style Beam According to CAE Theory;
基于CAE理论的起重机箱形梁有限元分析
18.
Research on Finite Element Simulation of Bulk Metal Forming Based on Deformation Theory
基于全量理论的金属体积成形有限元模拟研究