1.
Analysis and Research of Temperature Effect in the Structure on the Condition of Different Side-displacement Rigidity;
不同侧移刚度条件下结构温度效应的分析研究
2.
STORY SIDESWAY STIFFNESS OF SHEAR WALL IN REINFORCED CONCRETE STRUCTURES
钢筋混凝土结构中剪力墙的层间侧移刚度
3.
The whole stiffness matrix of structural system is derived by condensation approach.
分析了结构运动方程,并采用缩聚法建立结构总侧移刚度。
4.
Theory Study of Lateral Stiffness of Special-sharped Column and Application on Analysis of Frame Structure;
异形柱抗侧移刚度的理论研究及其在框架分析中的应用
5.
Researches on Lateral Stiffness of Wall Segment and Seismic Analyses of Masonry Structures;
砌体结构层间墙体侧移刚度研究及结构抗震分析
6.
EVALUATION OF LATERAL STIFFNESS RATIO OF COUPLING SHEAR WALL WITH FRAME TRANSFER STORY
带梁式转换层的联肢剪力墙结构的侧移刚度比计算
7.
Analysis on effective length of column in semi-rigid jointed steel frames with lateral displacements;
有侧移半刚性连接钢框架柱计算长度的研究
8.
Research on the Side Rigidity Matching Based on Improving the Vehicle Performance in Side Impact;
基于侧面碰撞安全性的车辆侧面刚度匹配研究
9.
Optimal Analysis for Lateral Stiffness in Mid-highriseRC Frame Shearwall Structure with Special-shaped Columns;
中高层异形柱框剪结构抗侧刚度优化
10.
Story Lateral Stiffness and Stability Analysis of Tilted Column Frame;
斜腿框架的层抗侧刚度及稳定性分析
11.
Testing and Numerical Fitting of Cornering Stiffness of 7.50R20 14PR PW02 Tire
7.50R20 14PR PW02型轮胎侧偏刚度的试验与拟合
12.
Lateral rigidity and shear resisting capacity of multi-ribbed composite wall
密肋复合墙板抗侧刚度及承载力研究
13.
RELIABILITY ANALYSIS OF SEMI-RIGID STEEL FRAMES BASED ON PEAK DISPLACEMENT LIMITS
半刚性节点钢框架侧移限值的可靠性分析
14.
Stability analysis of columns in sway and semi-rigid composite frames
有侧移半刚性连接组合框架柱的稳定分析
15.
Study on Lateral Bearing Capacity and Lateral Stiffness of Prestressed Brick Walls;
集中式预应力砖墙的抗侧强度及抗侧刚度计算方法的研究
16.
Influence of Mill Bilateral Stiffness Difference on Hot Rolled Wide Heavy Plate Thickness Deviation
轧机两侧刚度差异对热轧宽厚板两侧厚度偏差的影响
17.
RESEARCH OF THE CURRENT AND DISPLACEMENT STIFFNESS CHARACTERISTIC OF AMB SYSTEM
电磁轴承系统的位移刚度和电流刚度特性研究
18.
Influence of Bilateral Stiffness Difference of Wide Heavy Plate Mill on Thickness Deviation between Two Sides of Plate
宽厚板轧机两侧刚度差异对两侧板厚偏差的影响