1.
The adjustment of rotation angle error of power box twin export axles of twin screw extruder
双螺杆挤压机动力箱双输出轴转角误差调整
2.
A Method to Measure Vertical Axis Roll Angular Errors of Machine Tool Based on Laser Interferometer
基于激光干涉仪的垂直轴滚转角误差测量方法
3.
Research on Uncertainty of Rotating Angle Error of Servo Turntable
伺服转台回转角度误差的不确定度研究
4.
The error pickoff is an angle-to-voltage transducer.
误差检测器是把角度转换为电压的传感器。
5.
The first boundary error has to be weighted by rotations and second by displacements.
第一个边界误差要用转角来加权，而第二个则用位移来加权。
6.
The Experimental Calibration of Angular Acceleration Parameters of Strapdown Gyroscope on Three-Axis Turntable
捷联陀螺角加速度误差系数在三轴转台上的实验标定
7.
Signal acquisition and non-linear error compensation technique of random rotating angle measurement by laser interference
激光干涉任意转角测量信号的获得及误差补偿技术
8.
Forecast Model and Error Analysis of the Line-of-Sight Angular Speed of Short Range Missiles
近程导弹瞄准线转动角速度预测模型及误差分析
9.
Influence of turntable angular position reference errors on laser SINS calibration
转台角位置基准误差对激光捷联惯导标定的影响分析
10.
A SINS Nonlinear Error Model Reflecting Better Characteristics of SINS Errors
基于欧拉平台误差角的SINS非线性误差模型研究
11.
The Reflected Beam's Phase Aberration Induced by the Fabrication Errors of Corner Cube Retroreflector
角锥棱镜的误差引起的反射光束相位误差分析
12.
The application of error separation techniqu in axis turing error measurement
误差分离技术在主轴回转误差检测中的应用
13.
Investigation on Magnetic Rotor's Rotating Error Measurement;
磁悬浮转子回转误差的测试技术研究
14.
Calibration for the Error Coefficients of the Gyroscopes in Non-Full Gesture Inertial Platform and Variable Structure Control of the Gesture Changing Before Launch
非全姿态惯性平台射前陀螺仪误差系数标定及测漂回路转角变结构控制
15.
This article discussed the method to reduce the error of the calculation from three aspects: error by not in-phase, difference in sample frequency and ideal sample frequency, and finite register length effects.
本文从减小同步误差、小频差序数和减小舍入误差等三个方面入手,减小功率因数角的计算误差。
16.
Analysis of Inspection and Measuring Method for 120° Distributing Angle Errors of Crankshaft Crankpins
曲轴曲拐120°角度误差检测方法分析
17.
The Optical Lever Enlarging Method Produced Error Because of the Angle;
光杠杆放大法测量中α角产生的误差
18.
Simulation Analysis of Phase-compare Angle Measurement Error Caused by Multipath over Sea Surface
海面多路径下比相测角误差仿真分析