1.
Keyword: Turn on water tower, discharge, flow Tai, pound at to press strong.
关键词：放水塔，流量，流态，冲击压强。
2.
Study on Prediction Method of Free Jet Scour Hole Based on Impact Pressure;
基于冲击压强的挑流冲坑预测方法研究
3.
Experimental & Numerical Study on the Characteristics of the Plunging Pressure Caused by Submerged Plunging Jet with High Velocity;
高速淹没射流冲击压强的试验和数值模拟研究
4.
Experimental study on impact pressure of waves on a horizontal plate of T-type breakwaters
T型防波堤水平板波浪冲击压强试验研究
5.
Investigation on Surface Strengthening of High Pressure Waterjet Peening;
高压水射流冲击材料表面强化的研究
6.
Studies on Shock Compression Behavior of Ferromagnetism Material Nd_2Fe_(14)B;
强磁材料钕铁硼的冲击压缩特性研究
7.
Technology of Exploring and Discharging Empty Ponding District under Deep and High Underground Pressure
深部强冲击地压下空区积水探放技术
8.
The Calculation of Impact Compactor s Impact Power and Impact Energy;
冲击压实机冲击力及冲击能量的计算
9.
Techno-economic analysis of dynamic compaction and impact compaction for foundations of collapsible loess;
湿陷性黄土地基强夯和冲击压实技术经济分析
10.
Inspection of Low Speed Impact Damage of CFRP with Pulsed and Lock-in Thermography
碳纤维增强复合材料层压板低速冲击损伤的脉冲红外热像检测
11.
LOW-VELOCITY IMPACT CHARACTERISTICS AND COMPRESSIVE STRENGTH AFTER IMPACT OF PLAIN WOVEN CARBON FIBER REINFORCED SILICON CARBIDE COMPOSITES
平纹编织碳纤维增强碳化硅复合材料低速冲击特性及冲击后的压缩强度(英文)
12.
Similarly, adding BGE also conduced to the improvement of impact strength and slight decrease in compressive strength and modulus.
加入BGE后,材料的冲击强度提高,但是压缩强度和模量减小。
13.
Analysis on effect of pressure oscillation shock on stress-release boot of SRM during ignition
发动机点火过程中压强振荡对人工脱粘的冲击分析
14.
Research on low velocity impact damageand residual compressive strength of woven composites
编织型复合材料低速冲击损伤及剩余压缩强度研究
15.
Numerical Simulation of Concrete Dynamic Compressive Strength Under Impact Loading Based on Mesomechanics
冲击荷载作用下混凝土抗压强度的细观力学数值模拟
16.
incompressible water impact
不可压缩撞水冲击力
17.
efficiency of impulse voltage generator
冲击电压发生器效率
18.
rated lightning impulse withstand voltage
额定雷电冲击耐受电压