1.
The task of determining the stress intensity factor is by no means a simple one.
确定应力强度因子的工作决不是简单的事件。
2.
The Measurement of the Unstable Thermal stress and Evaluating the Post-yield Stress Peak
非稳态热应力测试及屈服后应力峰值的确定
3.
The Determine of Rolling Mill Draught Pressure and Analysis of Stress-Strain in Rolling Process;
轧机轧制过程轧制压力的确定及应力应变分析
4.
Further Discussion for Explorations Confirming Method of Principl Stress Direction under the Plane Stress Condition;
平面应力状态主应力方向确定方法再探
5.
Determination of Stress Releasing Factor of HT250 Grade Gray Iron
HT250材料应力释放系数值的确定
6.
Determining Compression Modulus of Soft Soil by Cone Penetration Test
应用双桥静力触探确定淤泥压缩模量
7.
Stability Analysis for Some Classes of Dynamics under Uncertainty with Applications;
几类不确定动力系统的稳定性分析及应用
8.
Supplementary Regulations on Deciding the Place of Main Plain in the State of Plain Stree;
确定平面应力状态主平面位置的一个补充规定
9.
Determination of Steel Strand Controlled Tension Force and Calculation of Prestress Loss
钢绞线的控制张拉力确定和预应力损失计算
10.
Application of the Cone Penetration Test confirming loading force on railway geological investigation
静力触探确定承载力在铁路地质勘察中的应用
11.
Cohesion is best defined in terms of the plot of shear stress versus normal stress given in Figure 9.
粘结力最好根据图9中剪切应力和法向应力的关系曲线确定。
12.
Because of many uncertainties, an exact analysis of the stresses usually cannot be made.
由于许多不确定的因素通常不能进行正确的应力分析。
13.
The process to determine the distribution of the critical fatigue stress is also presented.
并给出了确定临界疲劳应力分布的过程.
14.
To each increment of load they respond with a definite change of stress and deformation.
对荷载的每个增量，应力的变形都有确定的变化。
15.
Precise Position of Prestressed Steel Pipes of the Anchoring System of a Road Bridge
某公路大桥锚碇锚固系统预应力钢管精确定位
16.
New Pile-soil Stress Ratio Calculation Method in Rushed Stone Pile Composite Foundation
确定碎石桩复合地基桩土应力比的一种新方法
17.
The Study of Dynamic Critical Stress Determination Method in Aerocraft Hydraulic Pipe System;
飞机液压导管动态应力临界值确定方法研究
18.
Uncertainty Analysis in Experimental Fluid Dynamics;
不确定度在实验流体动力学中的应用研究