1) friction stir welding
搅拌摩擦焊接
1.
Material flow patterns in friction stir welding;
搅拌摩擦焊接过程中材料流动形式
2.
Analysis of material deformations and residual stresses in friction stir welding;
搅拌摩擦焊接中材料变形及残余应力分析
3.
The material behavior analysis in joining non straight line weld by using friction stir welding;
搅拌摩擦焊接技术实现非直线焊缝过程中的材料行为分析
3) friction stir weld
搅拌摩擦焊
1.
Investigation on defect dynamic echo waveform of friction stir welding;
搅拌摩擦焊焊缝缺陷的超声波动态波形分析
2.
The metal flowing behavior in weld zone has a great influence on the welds mechanical performance in friction stir welding.
搅拌摩擦焊中焊缝材料的流动对焊件性能有很大影响。
3.
The friction stir welding (FSW) of 5 mm thickness plates of 1060 Al/3003 Al was carried out.
搅拌摩擦焊中,材料的流动状态对焊件性能有很大影响。
4) friction stir welding
搅拌摩擦焊
1.
Influences of friction stir welding parameters on microstructure and mechanical properties of dissimilar magnesium alloys joint;
搅拌摩擦焊工艺参数对异种镁合金接头组织和性能的影响
2.
Development and application of friction stir welding;
搅拌摩擦焊接技术的研究进展和应用
3.
Analysis of Defects in Friction Stir Welding of Aluminum Alloy;
铝合金搅拌摩擦焊焊接过程缺陷分析
5) friction stir welding(FSW)
搅拌摩擦焊
1.
This paper introduces the principle and characteristics of friction stir welding(FSW),the materials and design of shoulder and pin of FSW,the fix of welded workpiece,the application of simulation and modeling techniques,as well as the feasibility of its applications to naval weaponry such as advanced amphibious assault vehicle(AAAV) and ships.
概述了搅拌摩擦焊的工作原理及其特性,搅拌摩擦头材料与设计,被焊接工件的固定,模拟和模型技术的应用,以及它在船舶和两栖突击车上的应用可行性。
2.
The influence of friction stir welding(FSW) process on magnesium alloy's mechanical properties is analyxed through tensile tests and bend tests.
采用不同搅拌摩擦焊工艺焊接镁合金,通过拉伸、三点弯曲试验分析了工艺参数对焊缝机械性能的影响。
3.
6M NaCl solution,by static weight loss experiment(gravimetric test) and potentiodynamic polarization curve and electrochemical impedance spectroscopy(EIS),the electrochemical corrosion behaviors of friction stir welding(FSW) dissimilar weld of 5083 and 6082 aluminum alloy and two parent materials were comparatively investigated.
首先,对铝合金5083-6082搅拌摩擦焊(FSW)焊缝与5083母材、6082母材的金相组织进行了研究,结果表明,焊缝的组织与两种母材相比,其晶粒明显细化。
6) friction-stir welding
搅拌摩擦焊
1.
Investigation of the technology of friction-stir welding for dissimilar materials of T2 copper to H62 brass;
T2紫铜与H62黄铜异种材料间的搅拌摩擦焊工艺研究
2.
Wearing mechanism of tools in friction-stir welding joint of stainless steel;
不锈钢搅拌摩擦焊摩擦头磨损机理研究
3.
Microstructures and mechanical properties of friction-stir welding joint of 7A09 aluminium alloy thick-sheet;
7A09铝合金厚板搅拌摩擦焊接头显微组织与性能研究
补充资料：摩擦焊接
分子式：
CAS号：
性质：利用热塑性塑料之间相互摩擦所生成的摩擦热，使摩擦面受热熔融，经加压并冷却后，即可使其连接在一起的方法。有旋转摩擦焊接和振动摩擦焊接之分。一般的动摩擦系数大的焊接效率就高。
CAS号：
性质：利用热塑性塑料之间相互摩擦所生成的摩擦热，使摩擦面受热熔融，经加压并冷却后，即可使其连接在一起的方法。有旋转摩擦焊接和振动摩擦焊接之分。一般的动摩擦系数大的焊接效率就高。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条