1) friction stir welding
厚板搅拌摩擦焊
1.
Technology of friction stir welding for copper and mild steel thick plate
紫铜与低碳钢厚板搅拌摩擦焊工艺分析
2) friction stir weld
搅拌摩擦焊
1.
Investigation on defect dynamic echo waveform of friction stir welding;
搅拌摩擦焊焊缝缺陷的超声波动态波形分析
2.
The metal flowing behavior in weld zone has a great influence on the welds mechanical performance in friction stir welding.
搅拌摩擦焊中焊缝材料的流动对焊件性能有很大影响。
3.
The friction stir welding (FSW) of 5 mm thickness plates of 1060 Al/3003 Al was carried out.
搅拌摩擦焊中,材料的流动状态对焊件性能有很大影响。
3) friction stir welding
搅拌摩擦焊
1.
Influences of friction stir welding parameters on microstructure and mechanical properties of dissimilar magnesium alloys joint;
搅拌摩擦焊工艺参数对异种镁合金接头组织和性能的影响
2.
Development and application of friction stir welding;
搅拌摩擦焊接技术的研究进展和应用
3.
Analysis of Defects in Friction Stir Welding of Aluminum Alloy;
铝合金搅拌摩擦焊焊接过程缺陷分析
4) friction stir welding(FSW)
搅拌摩擦焊
1.
This paper introduces the principle and characteristics of friction stir welding(FSW),the materials and design of shoulder and pin of FSW,the fix of welded workpiece,the application of simulation and modeling techniques,as well as the feasibility of its applications to naval weaponry such as advanced amphibious assault vehicle(AAAV) and ships.
概述了搅拌摩擦焊的工作原理及其特性,搅拌摩擦头材料与设计,被焊接工件的固定,模拟和模型技术的应用,以及它在船舶和两栖突击车上的应用可行性。
2.
The influence of friction stir welding(FSW) process on magnesium alloy's mechanical properties is analyxed through tensile tests and bend tests.
采用不同搅拌摩擦焊工艺焊接镁合金,通过拉伸、三点弯曲试验分析了工艺参数对焊缝机械性能的影响。
3.
6M NaCl solution,by static weight loss experiment(gravimetric test) and potentiodynamic polarization curve and electrochemical impedance spectroscopy(EIS),the electrochemical corrosion behaviors of friction stir welding(FSW) dissimilar weld of 5083 and 6082 aluminum alloy and two parent materials were comparatively investigated.
首先,对铝合金5083-6082搅拌摩擦焊(FSW)焊缝与5083母材、6082母材的金相组织进行了研究,结果表明,焊缝的组织与两种母材相比,其晶粒明显细化。
5) friction-stir welding
搅拌摩擦焊
1.
Investigation of the technology of friction-stir welding for dissimilar materials of T2 copper to H62 brass;
T2紫铜与H62黄铜异种材料间的搅拌摩擦焊工艺研究
2.
Wearing mechanism of tools in friction-stir welding joint of stainless steel;
不锈钢搅拌摩擦焊摩擦头磨损机理研究
3.
Microstructures and mechanical properties of friction-stir welding joint of 7A09 aluminium alloy thick-sheet;
7A09铝合金厚板搅拌摩擦焊接头显微组织与性能研究
6) FSW
搅拌摩擦焊
1.
Analysis and comparison of FSW temperature field simulation of plates 3 mm-LY12 and 10 mm-LF2;
3mmLY12与10mmLF2搅拌摩擦焊温度场模拟分析比较
2.
High-effective,solid-phase new welding technology——FSW;
高效、固相焊接新技术——搅拌摩擦焊
3.
Influences of FSW parameters on mechanical properties of LF6/ LD10 aluminum alloy;
LF6/LD10铝合金搅拌摩擦焊工艺参数对接头性能的影响
补充资料：厚板
厚板
heavy plate
houban厚板(heavy plate)厚度在4mm以上的板材。厚钢板的厚度范围为4~12omm，ZOmm以下的常称中厚板，60mm以上的是特厚板，最大厚度可达soomm。厚钢板的宽度范围为600一3800mm，最大可达s000mm。由于船舶制造、桥梁建筑、石油化工、交通运输、军事工业等部门的迅速发展，以及用板料焊接构件、钢管及型钢的广泛应用，需要大量宽而长的优质厚板，因而厚板生产得到迅速发展。(见彩图插页第4页)厚板采用热轧方式生产，在热轧过程中以严格的热轧工艺制度(见厚板生产)保证其组织性能和力学性能;控制温度和清除氧化铁皮尤为重要。厚板材质日益向合金化发展，厚板生产规模日益向大型化发展，厚板轧机则日益向重型化、高速化和自动化方向发展。 (李生智李隆旭)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条