1) nitrided pure-iron sheet
纯铁渗氮
2) ion nitriding with pure nitrogen
纯氮离子渗氮
1.
The process and mechanism of ion nitriding with pure nitrogen were studied by way of continuous nitrogen supply simultaneously with vacuum pumping and furnace shutdown after intermittent nitrogen supply,respectively,under cathode voltage of 500,600,650 and 700 V.
分别研究了在500、600、650和700 V阴极电压条件下采用连续供气抽真空和间歇供氮闭炉的方式进行纯氮离子渗氮的工艺及机理。
3) ferrites nitrocaburizing
铁素体氮碳共渗
4) pure nitrogen
纯氮
1.
Research on New Process of Ion Nitriding at Pure Nitrogen Atmosphere and Ion Nitriding Mechanism;
纯氮离子渗氮新工艺及离子渗氮机理研究
2.
CrMoAl steel was nitirded under the pure nitrogen by active screen plasma nitriding (ASPN).
在纯氮气氛中,利用活性屏离子渗氮(ASPN)技术对 38CrMoAl钢进行了离子渗氮处理,并对渗层的组织结构、硬度、深度等进行了分析。
3.
In order to obtain MnN, manganese power has been nitrided by pure nitrogen at high temperature in pipe-type-oven at lab.
介绍了利用金属锰粉采用固态氮化法生产氮化锰合金的原理和工艺,采用正交设计法,在实验室管式炉内、高温条件下利用纯氮(≥99。
5) salt bath ferritic nitrocarburizing
盐浴铁素体氮碳共渗
6) nitriding
['naitraidiŋ]
渗氮
1.
Liquid phase plasma electrolytic carburizing, nitriding,carbonitriding technique;
液相等离子体电解渗碳、渗氮及其碳氮共渗技术
2.
Optimum study on atmospheric pressure non-equilibrium plasma nitriding using dielectric barrier discharge;
常压介质阻挡放电非平衡等离子体渗氮工艺的优化
3.
Effect on substrate-film adherence of TiN film enhanced plasma nitriding;
等离子体渗氮与氮化钛膜沉积一体化工艺对膜基结合力的影响
补充资料：纯铁
纯铁
pure iron
纯铁下3种。PUre lron①铁含量大于99.工业纯铁5%的铁。:纯度为99.6一99只叱分为以二七面石民班‘.阿姆科(Armco)铁、电解铁和拨基铁。、阿姆科铁的最大磁导率尚为3500一5000，矫顽力Hc为乓8一80A/m，1.0T磁感应强度下的磁滞损耗几约为‘2.12w/kgo②纯铁:纯度为99.90一99.95%。是将工业纯铁在纯干氢中高温净化处理或真空重熔处理，将残余杂质元素进一步去除而制成。用于科学实验。③高纯铁:纯度为99.990一99.997%。是将工业纯铁或纯铁再经区域提纯制成。其软磁性能优越，月m可达100000，Hc为4.OA/m，只约为0.08W/kg，其成本高。 (何忠治)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条