1) gelled foam
冻胶泡沫
1.
The gelled foam comprises of water, gas foaming agent (surfactant), stable foam agent (polymer ) and cross-linking agent.
冻胶泡沫是由水、气、起泡剂(表面活性剂)、稳泡剂(聚合物)和交联剂组成。
2) gel
冻胶
1.
Study on high-relative viscosity polyamide 6 gel;
高相对粘度聚酰胺6冻胶的研究
2.
Laboratory evaluation of HSG profile modification gel.;
HSG冻胶调剖堵水剂室内评价
3.
The influence of temperature on the rheological properties of profile modification gel HSG;
温度对HSG冻胶体系流变性的影响
3) jelly
冻胶
4) gel fiber
冻胶纤维
1.
Effect of extraction conditions on structure and properties of UHMWPE gel fibers;
萃取条件对UHMWPE冻胶纤维结构与性能的影响
2.
The double-diffusion process between fiber solvent and extracting agent in the extracting system of ultra-high molecular weight polyethylene (UHMWPE) gel fibers was mathematically analyzed, the formula to calculate the diffusion coefficient of fiber solvent was concluded.
对超高相对分子质量聚乙烯(UHMWPE)冻胶纤维萃取体系中溶剂与萃取剂的双扩散过程进行了数学分析,推导出纤维溶剂扩散系数的计算公式。
3.
The optimum extracting and drying technology of the UHMWPE gel fiber including the optimum extracting time,extracting bath ratio, drying temperature and drying time were studied and determined.
对超高相对分子量聚乙烯 (UHMWPE)冻胶纤维进行萃取、干燥是改善其拉伸性能的主要技术关键。
5) Microgel
微冻胶
1.
Two kinds of techniques for the preparation of microgel were reviewed:shear cross-linking technique and emulsion polymerization cross-linking technique.
详细论述了微冻胶的两种制备工艺:剪切交联和乳液聚合方法,简单介绍了微冻胶的评价方法和评价参数,并提出了建议。
2.
By reviewing the development of plugging agent for improved oil recovery(IOR),this paper presents the characteristics of microgel plugging agent in comparison with several kinds of polymer gel plugging agents.
该文在分析国内外微冻胶堵剂发展前沿的基础上,通过与其他冻胶类堵剂的对比,提出了微冻胶堵剂相对于其他类型堵剂的特点。
6) gel spinning
冻胶纺丝
1.
The polyvinyl alcohol (PVA) fiber water-soluble at 5 - 80℃ was prepared with methyl alcohol as a solvent by gel spinning.
通过甲醇溶剂冻胶纺丝制备水溶温度为5-80℃聚乙烯醇(PVA)水溶纤维,采用X射线衍射、双折射、电子强伸仪等测定了PVA水溶纤维的结晶度、取向度、应力应变曲线。
2.
The results showed that dimethyl sulphoxide and formamide were not rational choices for gel spinning process of high-relative viscosity nylon 6 when m- cresol, sulfonic acid and form.
结果表明:二甲基亚砜和甲酰胺不宜作高相对粘度尼龙6的冻胶纺丝溶剂,硫酸、甲酸和间甲酚比较适宜;提高温度有利于降低剪切速率,质量分数为12％的间甲酚溶液和质量分数为9％的甲酸溶液作溶剂,其尼龙6溶液分别在50～60℃和45℃以上有较好的可纺性;溶剂对尼龙6晶体结构的形成有着重要的影响。
3.
The ultrahigh molecular weight polyethylene/carbon nanotube (UHMWPE/CNTs) composite fiber was prepared by gel spinning process.
利用冻胶纺丝的方法制备了超高相对分子质量聚乙烯／碳纳米管(UHMWPE／CNTs)复合纤维,以高锰酸钾和硫酸为氧化剂对CNTs进行纯化处理,用DNZ-201钛酸酯对纯化处理后的CNTs进行功能化处理。
参考词条
补充资料：阳冻
1.地面上的冰冻。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。