1) 316 stainless steel
316不锈钢
1.
Protection of organic silicon coating on 316 stainless steel;
有机硅涂层对316不锈钢的防护
2.
The basic principle and processes of a new fabrication technique,Selective Laser Sintering,were presented for the fabrication of 316 stainless steel with lotus root-shape structure in this paper.
利用SEM分析了316不锈钢藕状多孔试样的微观孔隙特征,并测定其孔隙率,结果表明其孔径大小分布均匀(2～4μm),平均孔隙率约为60%,孔隙贯通性良好;初步探讨了选区激光烧结制备316不锈钢藕状多孔结构的成形机制。
3.
Results show that the material is 316 stainless steel,and the failure was due to pitting induced by chloride which was enriched from the enviroment in the medium in local areas of it.
结果表明,该管的材质为316不锈钢;失效原因是由于在其管外壁的局部环境中氯化物的富集而发生点蚀,进而引发管子应力腐蚀开裂,最终造成管内氢气的泄漏。
2) Stainless steel 316
不锈钢316
4) 316 stainless steel /WC-Co
316不锈钢/WC-Co
5) 316 austenitic stainless steel
316奥氏体不锈钢
1.
The surface modification of 316 austenitic stainless steel has been investigated by plasma-based low-energy ion implantatio n apparatus at various temperatures and working atmospheric pressure.
采用等离子体基低能离子注入装置在不同注入温度、气压条件下氮离子注入316奥氏体不锈钢。
6) 304/316 austenitic stainless steel
奥氏体不锈钢304/316
补充资料：316L不锈钢纤维
316L不锈钢纤维
一噢撒 乙}6L不锈钢纤维
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条