1)  Thermal-mechanical loading
热力加载
2)  thermal
热力
1.
Feasibility of ultra-fine comminution by combination of thermal and high-pressure-water-jet;
利用热力辅助高压水射流进行超细粉碎的探讨
2.
The activation effect of coal gangue used as mineral admixture for high performance cement by means of thermally treatment at different temperatures and addition of chemical activators was attempted in laboratory.
用芒硝或水玻璃作为激发剂对煤矸石施加热力化学复合活化,在适宜的掺量范围内水泥强度,尤其是早期强度,得到进一步改善。
3.
The heat efficiency of different modes of drainage recycling is calculated and analyzed with heat balance method and equivalent enthalpy drop method in this paper,which provides the quantitative date for thermal system e.
热力系统疏水回收方式对机组的热经济性有很大的影响。
3)  heat
热力
1.
The effect of sterilization was studied when the milk temperature attained the same temperature by means of experiments of microwave heating and normal heating.
为了探讨不同杀菌方式对牛乳杀菌效果的优劣,对牛乳微波杀菌和热力杀菌进行了对比试验。
2.
Objective To know the germicidal efficacy of tableware disinfector with ozone,ultraviolet rays and heat as the germicidal factors.
目的了解以臭氧、紫外线和热力为杀菌因子的食具消毒柜杀菌效果。
3.
In order to observe the germicidal efficacy of combined use of citric acid and heat and to explore the possibility of their application to disinfection of the pipeline of hemodialysis machine,carrier immersion quantitative germicidal test and simulated field test were used to carry out study.
为观察柠檬酸与热力联合应用杀菌效果,探索其用于血液透析机管路消毒的可能性,采用载体浸泡定量杀菌试验和模拟现场试验进行了研究。
4)  heating power
热力
1.
The path to resolve hydraulic power and heating power stepout of boiler system;
解决供热系统水力及热力失调的途径
2.
Using the cooling tower design for the circulating water station in a chemical plant,this article outlines the heating power and ventilation resistance calculations for the mechanically ventilated countercurrent cooling tower.
结合化工厂循环水站冷却塔的设计,介绍了通过对机械通风逆流冷却塔的热力和通风阻力的计算,求得冷却塔的最佳工艺参数,在满足正常生产要求的情况下,达到节能节电、取得较好的经济效益的目的。
3.
Geographic information system(GIS),as a new information technology,pays a very important role in efficiently dynamic management of heating power facilities.
地理信息系统(GIS)作为一项新的信息技术对热力设施的高效动态管理起着十分重要的作用。
5)  thermodynamic
热力
1.
Based on calculation on thermodynamic and exergic balances,this paper discusses an absorption refrigeration system on availability and gives direction of energy savin
通过热力学计算,从火用的角度对吸收制冷工艺进行了热力学分析,提出了节能方向,对吸收制冷进行了综合评价。
2.
Auniformfast calculation model for CO2thermodynamic and transport properties in sub-critical pressure region,covering pressure fromthe pressure of triple point to critical point,superheating of 0~200 K,subcooling of 0~87 K,was presented.
提出CO2亚临界压力区具有统一形式的热力性质和传输特性的显式计算模型。
6)  thermodynamics
热力学
1.
Thermodynamics and Kinetics of In-situ Synthesized Mg_2Si/AM60 Composites;
原位生成Mg_2Si/AM60复合材料的热力学与动力学分析
2.
Biosorption of reactive brilliant blue KN-R by inactive Aspergillus fumigatus immobilized on CMC beads:Batch studies and thermodynamics;
CMC固定化灭活烟曲霉小球吸附活性艳蓝KN-R——批式实验与热力学
3.
Diffusion kinetics and thermodynamics in pike eel salting;
海鳗盐渍过程的动力学和热力学
参考词条
补充资料:热力学:热力学第零定律
热力学第零定律:
热力学中以热平衡概念为基础对温度作出定义的定律。通常表述为﹕与第三个系统处於热平衡状态的两个系统之间﹐必定处於热平衡状态。图中A 热力学第零定律示意图 ﹑B 热力学第零定律示意图 ﹑C 热力学第零定律示意图 为 3个质量和组成固定﹐且与外界完全隔绝的热力系统。将其中的B ﹑C 用绝热壁隔开﹐同时使它们分别与A 发生热接触。待A 与B 和A 与C 都达到热平衡时﹐再使B 与C 发生热接触。这时B 和C 的热力状态不再变化﹐这表明它们之间在热性质方面也已达到平衡。第零定律表明﹐一切互为热平衡的系统具有一个数值上相等的共同的宏观性质──温度。温度计所以能够测定物体温度正是依据这个原理。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。