1) boron modified phenolic resin
硼改性酚醛树脂
1.
The relationship between glass fiber(GF) content and thermal properties and mechanical properties of glass fiber reinforced boron modified phenolic resin(GF/BPR) composites were studied.
研究了玻璃纤维(GF)含量对玻璃纤维增强硼改性酚醛树脂(GF/BPR)复合材料力学性能、耐热性能的影响。
2) boron-silicon-modified phenolics
硼硅改性酚醛树脂
1.
A kind of boron-silicon-modified phenolics resin, which was synthesized through chemical modification based on boric acid and polyorganosiloxane, was used to prepare the paper base laminate.
采用硼酸、有机硅预聚物对酚醛树脂进行化学改性，合成出硼硅改性酚醛树脂，然后与纸基复合制得硼硅改性酚醛树脂纸基层压板，最后在层压板上再复合硼硅改性酚醛泡沫制成复合结构吸声材料。
3) modified phenolic resin
硼酸改性酚醛树脂
1.
The application of boric acid modified phenolic resin in aluminum silicate fiber paper
硼酸改性酚醛树脂在硅酸铝纤维纸中的应用
4) boron phenolic resin
硼酚醛树脂
1.
Study on properties of boron phenolic resin/butadiene acrylonitrile rubber(NBR) ablative materials;
硼酚醛树脂/丁腈橡胶烧蚀材料性能研究
2.
In this course,boron phenolic resin and curing accelerator by custom-made were chosen as curing agents,nano-montmorillonite and sericite powder as fillers,adhesive can be served at 300℃for long period.
采用甲基苯基硅树脂对酚醛环氧树脂进行改性,硼酚醛树脂与自制固化促进剂作为固化剂,辅以纳米蒙脱土、绢云母粉作为填料,制备出一种能在300℃条件下长期使用的耐高温胶粘剂。
3.
A new train of thought of copolymerising modification of the boron phenolic resin was applied and a new resin contained allyl was synthesized through allyl phenol, phenol, boric acid and polyformaldehyde.
运用硼酚醛树脂共聚改性的新思路 ,利用烯丙基苯酚、苯酚、硼酸、多聚甲醛等合成出结构中含有烯丙基活性基团的可与其它含不饱和双键树脂 (或化合物 )发生共聚反应的新型硼酚醛树脂 ,表征了它们的物理性能和结构。
5) boron-phenolic resin
硼酚醛树脂
1.
Study on matrix ablative resistance adhesive for MoSi_2 modified epoxy resin/ boron-phenolic resin;
MoSi_2改性硼酚醛树脂／环氧树脂的耐烧蚀胶粘剂研究
2.
Effect of content of silica aerogel and boron-phenolic resin on properties of EPDM/NBR flexible insulation material;
白炭黑与硼酚醛树脂用量对EPDM/NBR柔性绝热层材料性能的影响
3.
Molecular weight,molecular weight distribution,and thermal loss of high char yield phenolic resin and Boron-phenolic resin were characterized and compared by GPC and TG.
本文采用GPC和TG对高残碳酚醛树脂(HCYPR)和硼酚醛树脂(BPR)的分子量及其分布、热失重特性进行了表征和对比。
6) boron modified phenolic resin
硼酚醛树脂
1.
An ambient curable heat-resistant anti-corrosive paint has been pr epared by mixing of boron modified phenolic resin and epoxy resin, which combine s the outstanding acid and alkali resistance and heat resistance of boron modifi ed phenolic resin and ambient curable performance of epoxy resin.
通过将硼酚醛树脂和环氧树脂进行混用,利用硼酚醛树脂优异的耐酸、碱腐蚀性能以及耐高温性能和环氧树脂可以常温固化成膜的特点,制备常温固化的耐高温防腐蚀涂料。
2.
The coating with main materials, boron modified phenolic resin is developed in this paper.
本文研制开发了一种以硼酚醛树脂和环氧树脂为主要成膜物，以钛白粉、三聚磷酸铝、滑石粉和硫酸钡为主要颜填料的耐热耐蚀性涂料，经过正交实验确定了涂层的最终配方。
补充资料：改性酚醛树脂
分子式：
CAS号：
性质：用不同的化合物或聚合物通过化学或物理方法(如共聚或机械混合)改性制得的酚醛树脂，包括聚酰胺改性酚醛树脂、双氰胺改性酚醛树脂、环氧改性酚醛树脂、聚乙烯醇缩醛改性酚醛树脂等。改性后，酚醛树脂的冲击韧性、粘接性、机械强度、耐热性、阻燃性、尺寸稳定性、固化速度、成型工艺性等，分别得到提高。因此，可根据实际用途，选择不同的改性酚醛树脂。
CAS号：
性质：用不同的化合物或聚合物通过化学或物理方法(如共聚或机械混合)改性制得的酚醛树脂，包括聚酰胺改性酚醛树脂、双氰胺改性酚醛树脂、环氧改性酚醛树脂、聚乙烯醇缩醛改性酚醛树脂等。改性后，酚醛树脂的冲击韧性、粘接性、机械强度、耐热性、阻燃性、尺寸稳定性、固化速度、成型工艺性等，分别得到提高。因此，可根据实际用途，选择不同的改性酚醛树脂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条