说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 铝黄铜
1)  aluminum brass
铝黄铜
1.
Aluminum Brass Thrust Bearing Blocks are important component parts in turbocharger.
铝黄铜止推轴承座是发动机涡轮增压器的重要组成部件,其质量优劣直接影响涡轮增压器的性能和寿命。
2.
The corrosion property of the ceric aluminum brass with or without trace indium has been studied by means of weight loss measurement,electrochemical testing,X-Ray diffraction and scanning electron microscopy.
利用失重法、X射线衍射、电化学测试、扫描电镜等手段对比分析研究了含铟和不含铟的铈铝黄铜耐蚀性能。
3.
The cleaning was satisfactory and no selective corrosion and pit corrosion occurred to aluminum brass.
清洗效果理想,没有发生铝黄铜选择性腐蚀及点蚀,除垢率达到98%以上,达到了预期的目的。
2)  Al-brass
铝黄铜
1.
The corrosion behaviors of three Al-brasses with different components in 3.
通过测定3种不同成分的铝黄铜在NaCl(3。
3)  ceric aluminum brass
铈铝黄铜
1.
The processing abilities,structures and corrosion properties of the ceric aluminum brass and the arsenical aluminum brass were studied by means of metallographic analysis,microhardness measurement,mass loss measurement,electrochemical testing and scanning electron microscopy.
采用金相组织分析、显微硬度分析、质量损失分析、电化学测试和扫描电镜等手段研究铈铝黄铜和砷铝黄铜的加工性能、组织结构和耐蚀性能。
4)  arsenical aluminum brass
砷铝黄铜
1.
The processing abilities,structures and corrosion properties of the ceric aluminum brass and the arsenical aluminum brass were studied by means of metallographic analysis,microhardness measurement,mass loss measurement,electrochemical testing and scanning electron microscopy.
采用金相组织分析、显微硬度分析、质量损失分析、电化学测试和扫描电镜等手段研究铈铝黄铜和砷铝黄铜的加工性能、组织结构和耐蚀性能。
5)  albrac ['ælbræk]
铝砷黄铜
6)  Casting aluminium brass
铸铝黄铜
补充资料:铝黄铜
分子式:
CAS号:

性质:在铜锌合金的基础上加入铝的黄铜。一般铝含量在3.5%以下,它对气体、溶液,尤其是高速海水的耐腐蚀性能优良。按合金的含锌量分为单相。铝黄铜和(α+β)两相铝黄铜。单相。铝黄铜如77Cu-21Zn-2Al,有优良的冷加工性能,广泛用于舰船,海滨热电站用冷凝管及其他耐蚀件。在这种合金中,镁与锡是有害杂质,导致合金的耐蚀性下降,故镁、锡含量各不大于0.01%。(α+β)铝黄铜如60Cu-38Zn-1Al-1Fe,有较高的强度及耐蚀性,能承受热压力加工,用于制作齿轮、涡轮、衬套及要求耐蚀的零件,在海水中工作的高强度耐蚀零件。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条