2) rubber mixing
橡胶混炼
1.
Thus, this method realizes the full automatic optimizing in rubber mixing process by computer real time control.
首先研究了以橡胶混炼工艺参数为因素，采用区间划分因素的水平，自动确立优化目标和需优化因素的方法。
2.
The instantaneous power control and the MGKJ control system are used to realize the intelectual facultiescontrolled rubber mixing process on single internal mixer including automatic measurement of mix quality on line and automatic optimization of mixing process.
论述了密炼机橡胶混炼工艺智能控制的重要性：自动控制只有智能化才能确保混炼工艺优良，产品质量合格；指出了智能控制的条件、内容和途径：采用瞬时功率控制法及其控制系统ＭＧＫＪ可实现混炼胶质量自动在线检测和混炼工艺自动优化等单台密炼机混炼工艺的智能控制。
3.
The theory of the method of controlling instantaneous power on the mixing technology was composed of the mechanism of the rubber mixing process,the rheologic theory on the internal mixer,and the power curve in mixing process.
橡胶密炼机混炼工艺瞬时功率控制法的理论由３部分组成：橡胶混炼过程的机理、密炼机流变理论和混炼过程功率曲线。
3) continuous mixing
连续混炼
1.
This paper briefly introduced seversl new kinds of type extrusion molding technology,as follows: the pin cold feed extruder for plasticizing natural rubber,the double screw continuous mixing,the pin cold feed extruder for straining,the new type rubber sheet extrusion molding unit etc,as well as the contrast between traditional and new technology.
简要介绍了销钉式冷喂料挤出机、双螺杆连续混炼、销钉式冷喂料挤出机及新型胶片挤出成型机组等几种新型挤出成型技术,并将传统工艺与新工艺进行了对比。
2.
So the concept of continuous mixing was established and such mixer was designed, as a result, to produce continuously is possible which improves the efficiency and quality of sizing material.
因此,人们提出了连续混炼的概念,并设计出了一系列的连续混炼设备,这些设备的使用,使得连续生产成为可能,提高了生产效率,保证了胶料的质量。
4) mixed silicone rubber
混炼硅橡胶
1.
The blending technology of mixed silicone rubber (Ⅸ);
混炼硅橡胶的配合技术(九)
2.
The blending technology of mixed silicone rubber (X);
混炼硅橡胶的配合技术(十)
3.
The assortted technology of mixed silicone rubber(Ⅱ);
混炼硅橡胶的配合技术(二)
5) internal rubber mixing
密炼机橡胶混炼
6) continuous mixer
连续混炼机
1.
A three dimensional non Newtonian isothermal flow field model is established for a rotor in a new continuous mixer.
建立新型连续混炼机的转子三维非牛顿等温流场模型 ,利用ANSYS软件和自编程序 ,对转子流场中的周向回流量及平均剪切应力进行了模拟计算 ,讨论了端面几何形状变化对周向回流量及平均剪切应力的影
2.
The rotating heat pipe cooling technique with self-evaporating circulating liquid for the rotor in continuous mixer was investigated by a simulating experiment.
研究结果表明 ,采用自蒸发循环旋转热管冷却技术冷却连续混炼机的转子具有高效的导热性、良好的表面均温性、无泄漏等优点。
3.
Present situation of development of continuous mixers for polymer compounds in the world,especially kneading co rotating twin screw extruders for compounds is summarized,and some proposals for design and operation of continuous mixers are presented.
综述了国内外聚合物配混料用连续混炼机的发展现状 ,特别叙述了啮合同向双螺杆挤出造粒机的发展 ,并对我国连续混炼机的设计制造和使用提出了一些建议。
补充资料：连续混炼法
分子式：
CAS号：
性质：使用形同压出机的连续混炼机，可以连续加料、连续混合和排胶，实现了炼胶的连续化，这是炼胶工艺的最新发展，可显著提高炼胶生产效率。这种压出式连续混炼机的机筒内，分为进料区、混炼区和压出排胶区。结构有双转子式、传递杆式、螺杆式及挡板螺杆式。此机在生产中不仅可代替密炼机，还可代替压片机、造粒机和胶料热炼机。此机在喂料口可连续自动控制加料，故生胶最好经造粒喂入，更符合该工艺要求。
CAS号：
性质：使用形同压出机的连续混炼机，可以连续加料、连续混合和排胶，实现了炼胶的连续化，这是炼胶工艺的最新发展，可显著提高炼胶生产效率。这种压出式连续混炼机的机筒内，分为进料区、混炼区和压出排胶区。结构有双转子式、传递杆式、螺杆式及挡板螺杆式。此机在生产中不仅可代替密炼机，还可代替压片机、造粒机和胶料热炼机。此机在喂料口可连续自动控制加料，故生胶最好经造粒喂入，更符合该工艺要求。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条