1)  Etching method
侵蚀方法
2)  Erosion
侵蚀
1.
Effect of AOD Oxidizing Slag on Magnesia-Calcia Lining Erosion;
AOD氧化期渣对镁钙质炉衬侵蚀的影响
2.
Numerical simulation of erosion for carbon-based composites impacted by hypervelocity particles;
碳基材料超高速粒子侵蚀的数值模拟
3.
Theoretical analysis about erosion of refractory by slag which produced from new shaft furnace technology for smelting chrome iron;
竖炉冶炼铬铁新工艺炉渣对耐火材料侵蚀的理论分析
3)  attack
侵蚀
1.
Properties of cement-based material mixed with grounded slag powder due to sulfate attack at low pH value;
低pH值硫酸盐侵蚀下矿渣水泥基材料的性能
2.
Study on Resistance to Sulfate Attack on Mortar Containing Mineral Admixture;
掺矿物掺合料砂浆的抗硫酸盐侵蚀性能研究
3.
Based on katogene mechanism of acid rain attacking concrete,the simulation test of the acid rain attacking concrete was analyzed by the shower-lighten cycle method,which sets up its parameters,including the pH value and ion concentration of the liquor, rainfall,temperature and temperature difference,humidity under alternating between dry and humid etc.
根据酸雨对混凝土材料的侵蚀破坏作用,设置与实际情况相同的溶液pH值、离子浓度、喷淋雨量、温度与温差、干湿交替等参数,以喷淋-光照循环方式,模拟酸雨对混凝土的侵蚀。
4)  Etching
侵蚀
1.
Analysis on Etching of Slag Line Brick of Ladle for Refining Steel Cord of Tyre and Technology Measure for Increasing Service Life;
帘线钢钢包渣线砖侵蚀分析和提高寿命的工艺措施
2.
Effect of AC current density on etching of aluminum foil;
电流对高纯铝箔交流电侵蚀的影响
3.
Effect of chemical composition in aluminium foil during DC-etching;
高纯铝光箔化学成分对直流电侵蚀的影响
5)  Corrosion
侵蚀
1.
Effect of slag composition on the corrosion of MgO-Cr_2O_3 refractory used for RH lining;
预熔精炼渣组成对RH用镁铬砖侵蚀的影响
2.
Effect of adding manganese on oxidation and corrosion resistance of Al_2O_3-C refractories;
添加锰粉对铝碳耐火材料抗侵蚀性的影响
3.
Corrosion mechanism of electrocast AZS brick in total oxygen combustion glass tank;
全氧燃烧玻璃熔窑中电熔AZS砖侵蚀机理浅析
6)  soil erosion
侵蚀
1.
To understand the effect of the spatial heterogeneity of underlying surfaces and man kind activities on the soil erosion and sediment yield in small watershed, a distributed model for sediment yield in small basins based on isolated storm events is developed.
为反映因下垫面因子空间分布不均和人类活动对流域侵蚀产沙的影响 ,建立了基于场次暴雨的小流域侵蚀产沙分布式数学模型。
2.
The results of physical and chemical analysis of soil samples showed that the diameter changing point of soil particles caused by soil erosion is about 0.
通过小区采样并进行了机械组成和化学分析 ,认为侵蚀过程导致的土壤颗粒坡面分布变化点在 0 。
参考词条
补充资料:地下采矿方法设计的计算机方法


地下采矿方法设计的计算机方法
computerized design of under-ground mining method

  d一x!0 eo一kuong fongfo shejl deJ一suanjl fongfa地下采矿方法设计的计算机方法(c omPuter-ized design of underground mining method)用计算机和优化技术完成地下采矿方法设计的一种手段。由于地下采矿方法设计时,要考虑的因素很多,判断决策时又十分灵活,没有固定的程式和准则,计算机处理时难度较大,因此,世界各国在20世纪80年代才开始将计算机和现代数学方法应用于地下采矿方法的设计。地下采矿法设计的计算机方法包含采矿方法优选和采场结构参数的优化两方面的内容。其目的是达到安全、经济、有效地采出矿石。 采矿方法的优选主要方法有模糊数学法、专家系统法、多目标决策法和价值工程法等。 (l)模糊数学法选择采矿方法的主要依据是众多的地质技术条件。但是,并没有定义明确的选择准则可以遵循,所以,采用模糊数学法处理。首先,初选一些采矿方法作为候选者,已知这些采矿方法所要求的地质技术条件。然后列出拟选择采矿方法的矿山的地质技术条件,计算并确定它们与候选采矿方法所要求的地质技术条件之间的模糊相似程度,选择条件最相近的那个采矿方法。 模糊数学还可用来预测采矿方法将取得的技术经济指标。首先,列出本矿山的地质技术条件,再收集一些采用同样采矿方法的其他矿山的地质技术条件,对它们进行模糊聚类。聚类时,与本矿山近似程度最高的矿山取得高权值,其余矿山按聚类近似程度排序依次取较低的权值;然后将各矿山用这种采矿方法取得的技术经济指标加权平均,得到本矿山采用这种采矿方法可能取得的技术经济指标。 (2)专家系统法采矿专家选择采矿方法时,通常先根据矿岩稳固性选择空场法、崩落法或充填法等采矿方法的大类别;然后根据矿体倾角及其他条件选择运输方式和长壁法、分段崩落法等采矿方法小类别;再根据矿体厚度或分段高度选择浅孔、中深孔或深孔等不同的落矿方式。这个过程是一个明显的逻辑推理过程。把这种逻辑因果关系总结成规则,存放在计算机系统中,就建立了采矿方法选择的专家系统(见采矿专家系统)。使用时,输人所设计的矿山的地质技术条件.系统就会自动推理,选择出适用的采矿方法。 (3)多目标决策法选择采矿方法时,考虑采矿成本、采准切割量、矿石贫化率、矿石损失率、采场生产能力等多个因素。这些因素从不同侧面反映采矿方法的优劣,具有各自的计量单位。采用多目标决策法,将这些因素综合起来,从整体上评价几种采矿方法的可行方案,从中择优。 (4)价值工程法价值工程中,事物的价值用其功能与成本的比值来衡量。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。