说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 氧化层/二硅化钼
1)  Oxidizing layer/Molybdenum disilicide
氧化层/二硅化钼
2)  molybdic oxide/silica
氧化钼/二氧化硅
1.
The optimal charge ratio of reverse microemulsions and the necessary conditions of reverse microemulsion-gel system(MGS)were investigated in Span-80,Tween-80/cyclohexane/water water-in-oil microemulsions and the formation conditions of the molybdic oxide/silica complex gel were studied in non-microemulsion.
研究了反相微乳体系中各物质的最佳配比和非微乳环境下凝胶和微乳-凝胶形成的条件,合成了高度分散、形貌可控的氧化钼/二氧化硅(MoO3/SiO2)纳米复合氧化物,系统考察了反相微乳-凝胶体系(microemulsion-gel system,MGS)的后处理方式、陈化时间和水相含量。
3)  molybdenum disilicide
二硅化钼
1.
Two important routes currently being used to improve molybdenum disilicide mechanical property and oxidation are the alloying approach and the doping approach.
介绍了二硅化钼合金化及掺杂改性的研究进展,对几种重要合金化元素和掺杂元素改性的二硅化钼材料进行了评述,并在此基础上提出了高性能二硅化钼材料研究开发的重点和方向。
2.
Applications of 2 different extrusion modes(equal channel angular extrusion and conventional forward extrusion) to the forming of molybdenum disilicide electric heating elements and their influence on the micro structure and density are studied.
本文研究将2种不同挤压方式(等径角挤压和传统正挤压)应用于二硅化钼电热元件的成型工艺,研究其对材料的微观组织及致密度的影响。
4)  MoSi2
二硅化钼
1.
Self-propagating high temperature synthesis (SHS)is regarded as an effective technique for producing MoSi2 and MoSi2 based composites due to its low cost, quick reaction speed and high transformation rate.
自蔓延高温合成技术因具有低成本、反应速度快和转化率高等许多优点,成为制备二硅化钼基材料的有效方法。
2.
Various processes of the Mo/Si thin films deposited on Si (001) substrates by RF magnetron sputtering technique were carefully investigated and the MoSi2 thin film with the single tetragonal phase and low resistivity was successfully prepared.
用射频磁控溅射法在硅基底上成功制备出具有低电阻率的单一四方相二硅化钼薄膜,并通过X射线衍射仪、原子力显微镜及四探针电阻测试仪对退火前后的薄膜样品进行了结构和电学性能分析。
3.
The recent investigation development of MoSi2 including crystal structure,microstructure,properties and main application fields was reviewed.
金属间化合物二硅化钼由于具有较小的密度、较高的熔点,优异的抗氧化性,尤其是具有可贵的随温度上升强度并不下降的特性(R特性),使其得到广泛应用。
5)  MoSi_2
二硅化钼
1.
Progress in the Strengthening and Toughing of MoSi_2 through Composite Approach;
二硅化钼材料复合强韧化的研究进展
2.
Improvement of the Mechanical Properties and Application Ability of MoSi_2 Heating Element;
二硅化钼发热体力学性能的改进及其应用
3.
Application Prospects of MoSi_2 and MoSi_2 Matrix Composites;
二硅化钼及其复合材料的应用及展望
6)  molybdenum-disilicide
二硅化钼
1.
Effect of carbon upon mechanical properties of molybdenum-disilicide composites;
碳对二硅化钼复合材料性能的影响
补充资料:二硅化钼陶瓷
分子式:
CAS号:

性质:硅和钼的化合物。通常硅和钼按不同的配比在不同的工艺条件下反应可生成三种化合物。其化学式为:Mo3Si,Mo5Si3和MoSi2。MoSi2属四方晶系,密度为6.3g/cm3,熔点2030℃,常温下电阻为21.6μΩ·cm,高温时抗氧化性能良好。主要用作1700℃以下的氧化气氛中的发热元件。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条