1) extrusion engineering
挤出工程
2) extrusion process
挤出过程
1.
After establishing the model of SPC,the control system of plastic extrusion process was developed.
在建立统计过程控制模型后,开发了应用于塑料挤出过程的控制系统。
2.
The functional relation between the extrusion process temperature and shear stress and shear rate of the selected compounds for tire and hose was gained by determining their rheological properties The theoretical basis for changing the compounds viscosity of extrusive process by means of temperature or shear rate was put forwar
对几种用于轮胎、胶管的混炼胶进行了流变性能实验 ,得到混炼胶剪切应力、剪切速率与挤出过程温度之间的函数关系 ,为利用温度或剪切速率改变混炼胶挤出成型过程的粘度提供了理论依据。
3.
The dynamic extrusion process of PP/CaCO3 and LDPE/CaCO3 in the electromagnetic dynamic plasticating extruder was studied, and the effect mechanism of vibration force field on the extrusion process of filled polymer system was discussed.
研究了利用塑料电磁动态塑化挤出机加工PP/CaCO_3和LDPE/CaCO_3时的动态挤出过程,探讨了振动力场对聚合物填充体系挤出过程的影响规律和作用机理。
3) Extrusion
[英][eks'tru:ʒən] [美][ɛk'struʒən]
挤出过程
1.
Theoretical Analysis and Experimental Study of Axial Circle Flow in Twin-Screw Extrusion;
双螺杆挤出过程轴向循环流理论分析及实验研究
2.
The Application of Statistical Process Control (SPC) Technology in Extrusion Process;
统计过程控制技术（SPC）在挤出过程中的应用
4) extrusion processing
挤出工艺
1.
It differs from traditional tube extrusion processing.
为得到较好的导管截面形状,本文从材料的流变特性、机头设计、注气流量的控制以及挤出工艺参数的调节四个方面进行了实验研究,得出的结论对双腔导管的挤出成型有一定的参考作用。
5) extrusion process
挤出工艺
1.
Material properties and extrusion process of PE sheath of optic fiber cables;
光缆聚乙烯护套材料性能及其挤出工艺
2.
Problems to be solved in the extrusion process of LLDPE;
线性低密度聚乙烯挤出工艺中的几个问题
3.
The plastification quality of PVC profiles is discussed from such two aspects as the extrusion process and the assembling precision of the extrusion cylinders and screws.
从挤出机的挤出工艺和机筒、螺杆装配精度两方面讨论了与PVC异型材塑化质量的关系,提出了调整、改善塑化质量的方法。
6) extrusion
[英][eks'tru:ʒən] [美][ɛk'struʒən]
挤出工艺
1.
Al2O3 and SiC green tape with 02mm thickness used for LOM were prepared from a 48vol% ceramic suspension in a LDPE based organic vehicle by extrusion technique Rheological characterization of alumina suspension was performed Differential thermal analysis and SEM microstructure analysis of green tape were complete
采用挤出工艺制备了用于ＬＯＭ技术中的Ａｌ２Ｏ３和ＳｉＣ陶瓷片坯件，厚度０。
补充资料：坦克维修工程车(见坦克保养工程车、坦克修理工程车)
坦克维修工程车(见坦克保养工程车、坦克修理工程车)
tank maintenance %26 repair vehicle
一““、、’v‘丈人1以gUflgCnengChe坦克维修工程车(:artk Inaintenane。%26repair vehicle)装有坦克维修设备、仪器、工具的技术保障车辆。见坦克保养工程车、坦克修理工程车。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条