说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 微波强化烧结
1)  microwave promoting burning
微波强化烧结
2)  microwave continuous sintering
微波连续化烧结
1.
The conditions of quasi_static sintering of alumina ceramic were obtained based on the experimental results, and ceramic roller tube with a size of  40 mm× 2 400 mm was prepared sucessfully using microwave continuous sintering .
在实验研究基础上得到Al2O3 陶瓷的准静态烧结条件,并成功地实现了40 mm ×2 400 mm 陶瓷辊棒的微波连续化烧结。
3)  microwave sintering
微波烧结
1.
Influence of microwave sintering on microstructures and properties of copper powder metallurgy material;
微波烧结对粉末冶金铜材显微组织与性能的影响
2.
Preparation of WC-10Co cemented carbide by microwave sintering;
微波烧结法制备WC-10Co硬质合金
3.
Research progress in microwave sintering technology;
微波烧结技术的研究进展
4)  enhanced sintering
强化烧结
1.
A qualitative and quantitative assessment theory is presented for enhanced sintering in this work.
综述了强化烧结定性与定量分析的相关理论。
5)  microwave-assisted
微波强化
1.
o-Aminobenzoic acid wastewater treatment by complex process of microwave-assisted Fenton oxidation-MBR
微波强化Fenton氧化—MBR组合工艺处理邻氨基苯甲酸废水
2.
An experimental system of microwave-assisted Fenton oxidation was designed and tested.
设计了微波强化Fenton氧化处理系统,以难降解的邻氨基苯甲酸生产废水为研究对象,考察初始pH,微波辐射时间,微波辐射功率,ρ(H2O2),ρ(Fe2+)及催化剂投加量对降解效果的影响,并分析了各影响因子的作用机理和综合反应机理,确定了应用该系统的关键控制步骤。
6)  intensified sintering process
强化烧结法
1.
Study and application of intensified sintering processfor alumina production;
强化烧结法生产氧化铝新工艺的研究与实践
补充资料:强化烧结
分子式:
CAS号:

性质:又称活化烧结或强化烧结。通过添加物的作用,使反应与烧结同时进行的一种烧结方法。此法与普通烧结法比较,有如下两个主要特点:(1)提高制品质量,烧成的制品不收缩,尺寸不变化;(2)反应速度快,传质和传热过程贯彻在烧结全过程。普通烧结法物质迁移过程发生在坯体颗粒与颗粒的局部,反应烧结法物质迁移过程发生在长距离范围内。分为液相反应烧结和气相反应烧结两类。采用前一类的居多。例如,烧结氧氮化硅坯件时添加硅、二氧化硅和氟化钙(或氧化钙、氧化镁等,玻璃相形成剂)同氮反应生成二氮氧化二硅(Si2ON2),氧化钙、氧化镁等同二氧化硅形成玻璃相,氮溶解在焙融体(玻璃相)中;Si2ON2,晶体从被氮饱和的玻璃相中析出。这样制出的氧氮化硅的密度可相当于理论密度90%以上。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条