说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 减振性能
1)  vibration damping characteristic
减振性能
1.
The laminated damping steel sheet using phenolic resin-chloroprene rubber for sandwich possesses good vibration damping characteristic; in the temperature range from 20℃ to 150℃.
结果表明,用酚醛树脂氯丁橡胶作夹层的层压减振复合钢板,在20─150℃温度范围内具有良好的减振性能,其结构损耗因子在0。
2)  the damper performance test
减振器性能测试
3)  damping capacity
减振能力
1.
The damping capacity and strength of Fe-Cr high damping alloy by addition ofMo,Si.
初步研究了Mo、Si、Al、Mn、Cu、V对Fe-Cr基减振合金的强度和减振能力的影响。
4)  vibration energy dissipation
消能减振
1.
The principle and design method of vibration energy dissipation and structural control are introduced.
介绍了结构控制和消能减振技术的减振机理和减振设计方法 ,对不同结构构造的粘滞流体阻尼器的耗能原理进行了研究 ,研制出了一种性能稳定的双出杆型工程结构减振粘滞流体阻尼器 。
2.
The computing results prove that the viscous damper is a high-performance structural vibration energy dissipation device.
通过对设置粘滞阻尼器斜拉桥纵向非线性地震反应的分析,讨论了粘滞阻尼器各参数对结构地震响应的影响,并通过计算证实了粘滞阻尼器具有良好的消能减振效果。
3.
Based on the study and experiment, it can be concluded that this fluid viscous damper for vibration energy dissipation is a kind of velocity related damper without rigidity.
计算表明,流体阻尼器可有效地降低结构的振动反应,是一种性能良好的消能减振装置。
5)  energy dissipation
消能减振
1.
In this paper, nonlinear analysis program of energy dissipation structures is written with Wilson - θ method, considering the elastoplastic deformation of structure, elastoplastic buckling of steel braces, and nonlinear stiffness and nonlinear damping of JARRET energy dissipators.
在北京饭店抗震加固改造工程中,采用了消能减振新技术。
2.
Basic theory and method of energy dissipation technology are introduced into the teaching of structural mechanics.
将消能减振技术的基本原理、方法融入结构动力学的教学当中,通过理论分析、讨论并联系工程实际,在讲解结构力学基本理论的基础上,介绍学科前言知识,开阔学生的视野,激发学生的学习兴趣,取得了良好的教学效果。
6)  energy dissipation
耗能减振
1.
In this paper, the seismic damage analysis and control design of passive energy dissipation system installed in reinforced concrete structures have been studied.
本文研究钢筋混凝土结构设置被动耗能减振装置的地震损伤分析和控制设计。
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条