1) bury land pressure pipeline
埋地压力管道
1.
Building the finite element modle,to carrie out finite element analysis which bury land pressure pipeline starting a hole with two kinds of work condition.
建立有限元模型,对埋地压力管道带压开孔及实际运行两种工况进行有限元分析。
2.
Carry on analysis to the work which bury land pressure pipeline starting a hole and circulates two kinds of work condition physically, build up three kinds of mechanics models, carry on the strength calculation of pipeline respectively, relatively the mechanics function of bore position circumstance, provide instruction and draw lessons from for this kind of engineering management.
对埋地压力管道带压开孔及实际运行两种工况的工作载荷进行分析,建立3种力学模型,分别进行管道的强度计算,比较开孔位置的力学性能情况,为此类工程管理提供指导和借鉴。
2) buried pipeline
埋地管道
1.
Large deformation analysis of buried pipelines under the condition of collapse and gulch;
坍塌和冲沟作用下埋地管道大变形分析
2.
Temperature drop calculation of waxy crude in a buried pipeline after shutdown using enthalpy formulation;
采用焓法方程计算埋地管道含蜡原油停输温降
3.
Effect of external factor on asphalt coating of buried pipeline;
外界因素对埋地管道沥青防腐层的影响
3) underground pipeline
埋地管道
1.
Many underground pipelines are carried with heating tracer in permafrost region.
分析了带伴热管的寒区埋地管道的几何特性,建立了数学模型。
2.
Through analysis,the ideal characteristics of underground pipeline coating is given.
本文通过分析,提出了埋地管道涂层所应该具备的理想特性,并归纳了近年来应用于埋地管道的多种涂层系统及其特点。
3.
Based on the results of the sampling and field investigation of corrosion and corrosion control practice in underground pipeline in oil and gas stations,anti-corrosion coating and regional cathodic protection and monitoring in China and overseas are compared and analyzed.
介绍了国内外站场管道的腐蚀情况,并分别从防腐层、区域性阴极保护、在线监/检测角度进一步对比分析了国内外油气站场埋地管道的腐蚀控制情况;从防腐层和阴极保护两方面总结了站场埋地管道腐蚀的主要原因,制订了相应的腐蚀控制对策;并根据国内站场腐蚀的具体情况,从表面处理、防腐材料性能指标、防腐层结构和防腐等级设计几方面对优化站场管道防腐层提出了相应的建议。
4) buried pipelines
埋地管道
1.
Seismic response analysis of buried pipelines under the earthquake load;
埋地管道在地震载荷作用下的动力响应分析
2.
Analysis on relative stiffness of pipeline soil for buried pipelines;
埋地管道管土相对刚度的分析
3.
Three major factors affecting corrosion protection construction quality of buried pipelines are analyzed,including selecting proper coatings,improving surface treatment of pipelines and strictly following the application procedures.
文章对影响埋地管道防腐蚀施工质量的三个主要因素进行了全面分析,包括选择合适的涂层,提高管道表面预处理质量和严格要求涂装工艺过程。
5) buried pipe
埋地管道
1.
Buckling analysis of buried pipes subjected to fault movements;
跨越断层埋地管道屈曲分析
2.
Aseismic test of buried pipe crossing fault;
跨断层埋地管道抗震试验
3.
The ground deformation caused by earthquake,soil differential settlement often induces damage of the buried pipe due to pipe-soil interaction.
由于埋地管道与土体之间存在管、土相互作用,地震、地面不均匀沉降等地层变形均会导致管道受力、变形而被破坏。
6) buried pipe
地埋管道
1.
Calculating method and analysis of plane strain question of interaction between buried pipe and soil;
地埋管道与土相互作用平面分析与计算方法
2.
It is difficult to perform 3-D analysis on the interaction between buried pipe and soil.
通过基于高斯积分的隐式Runge-Kutta方法克服求解困难,实现对地埋管道结构的受力与变形的三维理论分析。
3.
Its necessary to consider interaction between buried pipe and soil when analyzing its structure between pipe and soil, which comes down to the determination of contact stress distribution on the interface.
对地埋管道结构分析,考虑管道与土的相互作用问题是非常必要的。
补充资料：锅炉、压力容器、压力管道及特种设备定期检验
锅炉、压力容器、压力管道及特种设备定期检验
periodic inspection of boilers, pressure vessels, pressure piping and special equipment
guolu YOli侧飞扣1 YOli gLJal对印ji tez陌叩劝以拍1 dingqi】，on四n锅炉、压力容器、压力管道及特种设备定期检验(peri诫c inspectionof城le。，p~切reves-Sels，p~二piPing ands衅过闪uiplr屺nt)为保证设备的安全使用，规定设备必须按一定周期进行法定的、强制性的检验。定期检验由政府设立的检验所、使用单位或行业检验站进行。检验单位及检验人员必须具有与所检设备相适应的资格。设备使用单位应该建立定期检验制度，做好检验计划，按时向检验单位提出申请。检验单位应该保证及时进行检验，检验按有关检验规则进行。检验时，设备使用单位应做好配合工作，提供必要的运行资料。检验完毕，检验单位要出具检验报告，对设备能否使用，要作出明确结论。如设备有缺陷，要提出是否修理、监护使用和报废的处理意见。锅炉压力容器安全监察机构根据检验机构的报告，发使用许可证书。有缺陷的，责令使用单位修理，修理后检验仍不符合安全要求的，则通知报废。使用单位逾期不进行定期检验，锅炉压力容器安全监察机构有权停止其设备运行。(陈亦惠)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条