1) integer side core-pulling
整体侧抽芯
1.
There are two structure characteristics were put forward,including the integer side core-pulling mechanism of the half block with mold cavity and the demoulding mechanism of the pin-point gate using single parting surface.
提出了型腔哈夫块实现整体侧抽芯和点浇口采用单分型面脱模的结构特点。
2) 3-side core-pulling
三面整体侧抽芯
3) side core-pulling
侧抽芯
1.
The die structure combined advantages of the side core-pulling and lifter body.
该模具结构结合了侧抽芯及斜顶两种机构的优点,既可以实现斜向抽芯,又方便加工和装配,易于保证制件精度,简化了模具结构和制作成本,提高了生产效率。
2.
the concave mold used side core-pulling mechanism, the mold structure was compact.
凹模采用侧抽芯,模具结构紧凑,对中性好。
3.
using single parting surface and side core-pulling, it satisfied the required of precision manufacturing.
采用单一分型面、侧抽芯方法,符合制造精度的要求,同时采用了镶件组合模式,提高了模具使用寿命,降低了模具成本,对同类制品具有一定的参考价值。
4) core-pulling in four directions
四侧抽芯
1.
Design of injection mould with inner sliding block core-pulling in four directions for fastener cover;
扣盖内滑块四侧抽芯注射模设计
5) inside core-pulling
内侧抽芯
1.
By analying the structure of battery box, a kind simple and the convenient processing mold structure is determined, problem of inside core-pulling is solved, moreover, it can reduce the mold cost greatly.
通过对电池盒零件的结构分析,确定一种简易且方便加工的模具结构,以解决内侧抽芯问题。
2.
The handle with turns on plastic fittings has a special external form, the inside counterbore of the short cylinder-shaped turret head on its end needs inside core-pulling, this paper elaborately introduced the characteristics of the die design and the design key points and attention items of employing inclined push rod structure.
手柄塑件弯角曲折的手柄外形特殊,其端部短圆柱状回转头的内部沉孔需要内侧抽芯,本文详细介绍了该模具设计的特点以及采用斜面顶杆结构的设计要点和注意事项。
6) side core-pulling
侧向抽芯
1.
and the mold also had the functions of side core-pulling and compulsive demoulding,be able to realize the fully automation in whole moulding process.
同时该模具还具备侧向抽芯和强制脱模等功能,在整个产品成型过程中能实现全自动化生产。
2.
Through analyzing on the product structure,designed a simple and workable mold with half structure to solve the side core-pulling problems, simplified mold structure and saved mold cost.
通过对产品的结构分析,设计一种简单可行的哈夫结构模具,以解决侧向抽芯的问题,简化模具结构,节省成本。
3.
The mould features in the design of controlled interval pull rod and side core-pulling mechanism and operates smoothly and reliably.
分析了摇窗机电机塑件的成型工艺特点,介绍了注射模结构及工作过程,注射模设计的结构特点是采用定距拉杆、侧向抽芯,经生产实践验证,模具结构设计巧妙,操作方便,使用寿命长,塑件达到技术要求。
补充资料：整体带芯输送带
分子式：
CAS号：
性质：输送带的一种。其抗拉层为根据成品强度要求编织的特殊结构的单层织物(整体芯)，经浸胶乳、贴缓冲层、覆盖胶，再经硫化而制成，可采用全塑料(如PVC)或橡塑并用胶料。此种输送带具有体轻、耐屈挠和不脱层等优点。可作为一般输送带使用，也可作为阻燃输送带或深槽输送带使用。
CAS号：
性质：输送带的一种。其抗拉层为根据成品强度要求编织的特殊结构的单层织物(整体芯)，经浸胶乳、贴缓冲层、覆盖胶，再经硫化而制成，可采用全塑料(如PVC)或橡塑并用胶料。此种输送带具有体轻、耐屈挠和不脱层等优点。可作为一般输送带使用，也可作为阻燃输送带或深槽输送带使用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条