说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 船艇冷库
1)  watercraft refrigerator
船艇冷库
1.
The design and simulation of fuzzy control system for watercraft refrigerator;
船艇冷库模糊控制系统的设计与仿真
2)  boathouse [英]['bəʊthaʊs]  [美]['bot'haus]
艇库,船库
3)  marine cold store
船舶冷库
4)  watercraft [英]['wɔ:təkrɑ:ft]  [美]['wɔtɚ,kræft]
船艇
1.
Design of fault prediction system for monitoring the operation state of watercraft diesel;
船艇柴油机运行状态监测故障预报系统的设计
2.
Research on computational methods of the hydrodynamic force of watercraft in maneuvering motion
操纵运动船艇水动力计算方法研究
3.
Based on the application condition and the character of the similar device, a safety accommodation ladder, which can flex, fold and lift automatically, can be electric and manual operated, is designed for medium or small sized watercraft to berth at a wharf in storm or in ebb and flow by the use of the Pro/E and ANSYS.
根据中小型船艇的工作情况,分析相关产品的结构特点,通过使用Pro/E造型和ANSYS有限元分析,设计了一种适合中小型船艇使用的船艇安全舷梯。
5)  ship [英][ʃɪp]  [美][ʃɪp]
船艇
1.
Discussion on how to promote capability-building of A-to-N ships for emergency response;
浅谈如何推进航标船艇应急反应能力建设
2.
The electromagetic braker in ship is a kind of electrical equipment which can change the electromagnetic force into mechaic braking force to make the electrical mator stop rapidly when the power supply being switched off,and the disc electromagetic braker is commonly used in ships.
船艇电磁制动器是把电磁力转变为机械制动力矩,从而使电动机断电后迅速停止的一种电器。
3.
In view of the teaching practice of mechanical and electrical specialty in current navigation colleges,combining the functions of ship power plant,this article proposed to adopt computer technology and to construct ship power plant synthesis simulation operation system,to carry out ship power plant integrated training and to enhance practical teaching effect.
针对当前航海类院校中机电专业实践教学实际,结合船艇电站各项功能,提出运用计算机技术,构建船艇电站综合仿真操作系统,实现船艇电站综合训练,提高实践教学效果。
6)  airship shed
飞艇库
补充资料:冷库
冷库
cold storage

   利用降温设施创造适宜的湿度和低温条件的仓库。又称冷藏库。加工、贮存农畜产品的场所。能摆脱气候的影响,延长农畜产品的贮存保鲜期限,以调节市场供应。冷库应建筑在交通方便,水、电供应来源可靠的地方,库址周围应有良好的环境卫生条件,尽量避开工矿企业的有害气体、烟雾、粉尘以及来自传染病院等的污染源。
   根据使用性质的不同,可分为生产性冷库、分配性冷库和生活服务性冷库3类。生产性冷库是食品加工企业的重要组成部分,一般建在货源集中的地区。其特点是冷加工能力大,贮存物品零进整出。分配性冷库一般建在大城市或水、陆交通枢纽及人口密集的工矿区,为市场供应、运输中转而贮备食品时用。其特点是冷藏容量大、冻结能力小,适宜于多种食品的贮存。生活服务性冷库是为调剂生活需要而临时贮存食品时用,其特点是库容量小、贮存期短、品种多、堆货率低。
   冷库建筑从施工开始到设备安装一般是在常温下进行的,结构体系也处于常温状态;而冷库投入使用后,其结构体系却处于低温环境中。由于温差大而引起的结构体系变形比普通建筑大得多,因此必须进行温度应力计算,以防止产生冷桥。地坪应采取防冻措施,以防止地基隆起而造成建筑物破坏。同时应选用抗冻性强的材料,以增强结构的耐冻性、耐久性。
   一般冷库多由制冷机制冷,利用气化温度很低的液体作为冷却剂,使其在低压和机械控制的条件下蒸发,吸收贮藏库内的热量,从而达到冷却降温的目的。最常用的是压缩式冷藏机,主要由压缩机、冷凝器和蒸发管等组成。按照蒸发管装置的方式又可分直接冷却和间接冷却两种。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条