1)  IRAMS06UP60A
IRAMS06UP60A
2)  IR
IR
1.
Syntheses of IrO_x-TiO_2 Nano-powers from TiN via Impregnation-thermal Decomposition Method and Its Characterization;
TiN浸渍-热分解法制备IrO_x-TiO_2粉体催化剂及其表征
2.
Study and application for microwave-assisted digestion technique for analysis of Pt Pd Rh Ir in precious metal alloys;
微波消解技术在难处理贵金属合金PtPdRhIr分析中的研究与应用
3.
Analysis for intermediate and by-product of crystal violet lactone with IR and NMR;
IR和NMR法对结晶紫内酯中间体及其副产物的分析
3)  iridium
Ir
1.
Interdiffusion problem of iridium/rhenium was studied during preparation of iridium/rhenium thruster.
在电子探针测量的基础上,根据扩散理论和Ir-Re相图数据,建立了一个全新的Ir/Re两相扩散模型。
2.
The superficial characteristics of iridium-doped gold jewelry and the occurrence and the chemical compositions of doped material in gold jewelry have been investigated by using optical microscopy and X-ray fluorescence spectrum analysis.
采用显微镜和X射线荧光光谱分析方法对掺Ir黄金饰品的外观特征、掺入物的化学成分、存在形式等进行了研究。
3.
The progress in the research of iridium-coated rhenium thruster nozzle prepared by chemical vapor deposition(CVD) is reviewed in this paper.
Re/Ir发动机是美国研制成功的应用于空间飞行器的第三代高性能发动机。
4)  Ir(Ⅳ)
Ir(Ⅳ)
5)  IR spectra
IR谱
1.
The vibrational frequencies,the IR spectra and the thermodynamics properties in different temperatures of the system were obtained on the basis of vibrational analysis, the relations of the effects of temperatures on thermodynamics properties were also obtained.
用B3LYP法,在6-31G(d,p)基组水平上计算4,6-双-(5-氨基-3-硝基-1,2,4-三唑-1-基)-5-硝基嘧啶(DANTNP)的性能,得其稳定的几何构型和键级;在振动分析的基础上求得体系的振动频率、IR谱及不同温度的热力学性质及温度对热力学性能影响的关系式。
2.
The vibrational frequencies,the IR spectra and the thermodynamics properties in different temperatures of the system were obtained on the basis of vibrational analysis,the relations of the effects of temperatures on thermodynamics properties were also obtained.
用B3LYP法,在6-31G(d,p)基组水平上计算二硝基吡唑并吡唑(DNPP)的性能,得其稳定的几何构型、分子轨道及键级;在振动分析的基础上求得体系的振动频率、IR谱及不同温度下的热力学性质,并得温度对热力学性能影响的关系式;用Monte-Carlo方法从理论上计算密度,运用Kamlet公式预测爆速。
3.
The full geometry optimization of N_(20)and IR spectra are performed using nonlocal density functional theory (DFT) method.
基于简谐振动分析求得IR谱频率,运用统计热力学方法,求得其在298~1500K的热力学性质C0p,m、S0m和H0m,还比较了N20分子和富勒烯的分子静电势图。
6)  FT-IR
FT-IR
1.
Investigation on UV curing reaction of dicyclopentadienyl acrylate by FT-IR;
丙烯酸双环戊二烯酯在UV固化反应中的FT-IR研究
2.
FT-IR and GC-MS Study on the Gas Solid Phase Photocatalysis of DECP over Nano-TiO_2;
DECP在纳米TiO_2上气-固相光催化的FT-IR和GC-MS研究
3.
Electrical Conductivity and FT-IR Spectrum of Microemulsion HEHEHP Saponified with Ammonia;
氨皂化的P507微乳液导电行为及FT-IR光谱研究
参考词条
补充资料:美国4st60md60t重型设备运输半拖车

国别 美国

名称 4st60md 60t重型设备运输半拖车

model 4st60md 60-tonne heavy equipment transporter semi-trailer

生产单位 fwd国际有限公司

fwd international inc,us

现状 准备生产

概述

该车是一种具有公路或越野用的双弯低架式重型半拖车,能够运载轮式或履带式车辆。工作平台主要铺板可以是钢板或木板。这种半拖车有4个桥,在与牵引车脱离情况下可以用2个前支腿帮助支撑,支腿的升降以2种速度机械操作。装卸跳板均为钢制或铝制,装载宽度可以调节。可用绞盘装卸负载,当负载装上工作平台后,用8个可拆卸围档、4个钢制楔形垫块和链条固定装置固定。装卸跳板下面的支腿有助于装卸负载或空载时的稳定性。该车采用弹簧带扭杆的摆杆式悬挂装置,每个系统均有8片大型钢板弹簧。在拖车的鹅颈状部可携带2个备用轮胎,顶部安装1个大储存箱,用来存放全套工具。车辆采用了空气制动器。电气系统制式的为12v,也可根据用户需要改装。可选用单弯低架式工作台。

性能数据

重量(空载)       12450kg

最大有效负载      60000kg

每桥负载        13590kg

车长

总长         16.129m

工作平台,双弯低架式 6.934m

桥上方的工作平台   5.08m

车宽          3.6067m

车高

总高         2.0447m

牵引座立轴      1.5621m

工作平台,满载    1.143m

车底距地高       0.66m

轴距          1.3208m

轮胎规格        14.00×20

轮胎数量        16个+2个备用

电气系统电压      12v(可选用24v)

说明:补充资料仅用于学习参考,请勿用于其它任何用途。