1)  governing-stage moving blade
调节级动叶片
1.
This article describes how the wiser finalize the machining steps and tools considering the characteristic of 600MW unit governing-stage moving blade.
根据600MW机组调节级动叶片的特点,在其制造的过程中利用M asterCAM、Pro/E联合造型。
2)  adjustment
调节
1.
Study and application of an arc track adjustment device;
圆弧轨迹调节装置的研究与应用
2.
Various ways of spinning Ⅱ.The spinning tension in cool and thermal-channel spinning and the process adjustment;
花色纺丝II.冷管热管纺丝张力不匀及工艺调节
3.
Adjustment of Psychological State among the First-line Staff against SARS;
SARS一线工作人员心理状态调节的研究
3)  regulation
调节
1.
Flow regulation in alternating transportation of product oil.;
成品油顺序输送交替过程中流量的调节
2.
Regulation of Hypothalamic-Pituitary-Adrenocortical Axis Dysfunction by Abnormal Savda Munziq;
异常黑胆质成熟剂对异常黑胆质载体动物模型下丘脑-垂体-肾上腺轴的调节作用研究
3.
Research Study about Expression and Regulation of Aquaporin Protein in Digestive System;
水通道蛋白在消化系统表达与调节的研究进展
4)  adjust
调节
1.
Establishment of experimental die model for adjusting the resilience of bending;
弯曲回弹调节试验模模型的建立
2.
Lactobacillus plantarum ST-Ⅲ's adjustion to the intestinal microflora in rats;
植物乳杆菌ST-Ⅲ对小鼠肠道菌群的调节
3.
Adjusting and Controlling in Spinning Tension of EJK211 Roving Machine;
EJK211型粗纱机纺纱张力的调节与控制
5)  regulate
调节
1.
This paper instructed how to automatic control the looper of the short continues bar mill of Bagang,by means of the control process diagram,we got a general method that regulate the looper and to control it.
通过控制流程,总结出了活套调节的一般方法。
2.
The article sets forth how to regulate and control the operating temperature in order to ensure the experiment against accidents.
本文就课题研究实验中,如何正确调节与控制操作温度,避免不正常现象的发生,确保实验的顺利进行作了详细的阐述。
3.
With theoretic analysis, we adopt the technique of averaging flow to regulate horizontal imbalance about hydraulic moving condition in the heating out net, fundamentally improve the problem of overbalance heating temperature, put forward some questions which need to be solved in the work of regulating out net.
介绍了水力工况失调的原因 ,通过理论分析 ,确定了采用平均流量调节法 ,对外网水力工况进行逐一水平调节 ,基本改善了供热温度不均的问题 ,并提出了外网调节中需要解决的一些问
6)  accommodation
调节
1.
Investigation of wavefront aberrations in humans with and without accommodation;
调节放松及调节状态人眼波前像差的研究
2.
Measurement of accommodation after implantation of the 1CU accommodating posterior chamber intraocular lens;
1CU可调节人工晶状体眼拟调节力临床分析
3.
The analysis of the relationship between accommodation convergence and Benton Visual Retention Test.;
调节、集合与视觉保持测试相关性研究
参考词条
补充资料:末级叶片强度振动


末级叶片强度振动
last stage blade strength and vibration

机组在调峰等变工况运行时,高背压、小流t(通常在相对容积流量35%~z0肠左右)条件下,末级叶片有可能发生气弹报合的自激振动,称为颇振;也有可能发生较大的随机振动。强烈的倾振和随机振动会造成叶片的损坏。在调峰等变工况运行时末级叶片近根部出汽边因燕汽回流造成的水滴冲刷侵蚀也是需要重视的问题。由于现代大机组也参与调峰运行,因此对调峰运行的适应性是对末级叶片的基本要求之 末级叶片图 不同汽轮机制造厂家的末级叶片有不同的风格,如自由叶片、叶片组及全周叶片组。末级自由叶片通常会有较多的振型需要调开低阶谐波共振;为防止发生颐振及随机振动,需设计为较宽较厚的刚性叶片。末级全周叶片组采用拉筋、围带连接成为全周结构。全周叶片组仅需调开三重点共振(激振谐波数、全周叶片组振动节径数及该节径振动频率与转速之比三者相等),其振动响应仅为相应自由叶片的10%~2。%,且不易激起颇振和随机振动。近年来发展的自带围带(或自带拉筋)运行接触式或紧接触式末级全周叶片组,取消了铆接、焊接等不利因素,其振动响应更小,是目前全周叶片组中先进的结构型式。 由于末级叶片在气动力学和强度振动方面都遇到最苛刻的条件,所以末级叶片的发展是汽轮机的一个重大关键技术问题。数十年来末级叶片长度的增加已成为汽轮机技术进步的重要标志。世界各主要汽轮机制造厂家的末级叶片长度均已形成系列.可根据机组的要求选择不同长度的末级叶片和排汽面积,且都已开发(用于3000r/min汽轮机,下同)长度超过lm的合金钢末级叶片。由于材料强度密度比的原因,合金钢制叶片的极限长度为1200 mm左右,更长的叶片需使用钦合金材料。钦合金材质轻(密度约为钢的60写),比强度高、耐蚀性好,用作末级叶片可比合金钢叶片有更长的长度和更大的排汽面积。国外已研制开发长度为1360 mm的钦合金末级叶片。 中国运行汽轮机中合金钢制造的长度超过lm的末级叶片和相应机组容量见表。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。