说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 体相异质结
1)  bulk-heterojunction
体相异质结
2)  bulk heterojunction
体异质结
1.
Simulation of polymer-fullerene bulk heterojunction solar cell;
有机体异质结太阳能电池的数值分析
2.
In order to verify the simulation,several bulk heterojunction organic photovaltaic cells were introduced.
制备了体异质结有机光伏电池,仿真对比和实验结果吻合。
3)  Bulk-Heterojunction
体异质结
1.
The Study of Controlling Electrospinning of PPV and PPV-N Bulk-Heterojunction Nanofibers and Their Properties
PPV及PPV-N型纳米晶体异质结纳米纤维的可控电纺与性能研究
4)  polymorphs
同质异相体
1.
Intermolecular potential energy and band calculation in polymorphs of pentacene;
并五苯同质异相体中分子间势能与能带计算
2.
They were probably both originated in post orogenic extension environment, and might be the polymorphs .
二者均形成于造山后伸展环境,属于由于岩浆向上运移、定位过程的不同而形成的“同质异相体”。
5)  bulk heterojunction
本体异质结
1.
Organic solar cells based on a stacked bulk heterojunction structure;
基于叠层结构的本体异质结有机太阳电池
2.
Having carefully examined the major constraining factors to the efficiency of polymer solar cell with structure of bulk heterojunction,the author summarized the methods of efficiency improvement,such as optimizing morphology on film surface,contact surface between electrode and active layer,as well as adding optical spacer to the structure.
介绍了几种具有代表性的聚合物薄膜光伏电池的基本结构及其工作原理,研究总结了目前制约聚合物光伏电池能量转换效率的因素和提高聚合物光伏电池效率的途径:如改善本体异质结结构的薄膜形貌、电极/活性层接触面和加入光学间隔层等。
6)  heterojunction bipolar transistor
异质结晶体管
1.
InGaP-GaAs thin base (8 nm) dual heterojunction material is grown by molecular beam extension ( MBE) , and a heterojunction bipolar transistor( HBT) with negative differential resistance ( NDR) characteristic is fabricated.
采用分子束外延方法生长了8 nm基区的InGaP-GaAs双异质结材料,研制成具有负阻特性的异质结晶体管。
2.
A thin base (8nm) InGaP/GaAs dual heterojunction material is grown by MBE and a heterojunction bipolar transistor (HBT) with negative differential resistance (NDR) is fabricated.
采用MBE方法生长了8nm基区的InGaP/GaAs双异质结材料,研制成具有负阻特性的异质结晶体管。
补充资料:多相脂质体139 , 三氨酸多相脂质体,油酸多相脂质体注射液
药物名称:油酸多相脂质体注射液

英文名:Polyphase Liposome-139

别名: 139;多相脂质体139 , 三氨酸多相脂质体,油酸多相脂质体注射液
外文名:Polyphase Liposome-139
适应症: 用于治疗各种消化管癌(如胃癌、结肠癌、肝癌、胰腺癌、食管癌等)、肺癌、淋巴肉瘤、乳腺癌等。
用量用法:
开始时1日量20ml,如无不良反应,逐渐增大剂量,最多可至1日50ml,加入氯化钠注射液中(250~500ml)混匀,缓缓静滴,滴速控制在每分钟40~60滴,每日1次,1个疗程总量1200~1500ml。如单用本品,1个疗程结束后,休息1周,进行复查,然后继续第2疗程。如是手术病人,术后2周开始维持给药,1日50ml,每周2次,用1个月。本品亦可与化疗或放疗合用,先用本品1疗程,休息1周后,,再按常规使用化疗或放疗,可减轻化疗药物的毒副作用,提高机体免疫功能。
注意事项:
1.用前将注射液振摇均匀后与等渗盐水混匀。 2.偶有面部发热,仅需减慢滴速即能恢复正常。 3.禁用于直接静脉推注,以免危险。 4.开始用药2~3日内白细胞可能略有下降,继续给药随即回升至正常水平。
规格: 针剂:10ml。


类别:其他抗肿瘤药及辅助治疗药
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条