1) acoustic properties of flow
![点击朗读](/dictall/images/read.gif)
流动声特性
2) features of passive acoustic signal
![点击朗读](/dictall/images/read.gif)
被动声特性
3) Vibration properties
![点击朗读](/dictall/images/read.gif)
声振动特性
4) flow behavior
![点击朗读](/dictall/images/read.gif)
流动特性
1.
Particle flow behavior and restriction in back-mixing region of riser-fluidized bed coupled reactor;
提升管-流化床耦合反应器颗粒约束返混区的流动特性及约束作用分析
2.
In this paper ,the significance of the garden stuff preservation is described, the mathematic model of fluid network in pressure-difference pre-cooling system is established and the flow behavior is soluted.
讨论了差压预冷在保存果蔬方面的意义,并建立了差压预冷系统中的流体网路的数学模型,而且对其流动特性进行了求解。
5) flow characteristic
![点击朗读](/dictall/images/read.gif)
流动特性
1.
Study on flow characteristic of Carrousel oxidation ditch;
![点击朗读](/dictall/images/read.gif)
Carrousel氧化沟的流动特性研究
2.
The analysis of flow characteristic in pre-mix abrisive water jet system;
![点击朗读](/dictall/images/read.gif)
前混合磨料射流系统的流动特性研究
3.
Theoretical analysis of oscillating flow characteristics in thermoacoustic systems;
![点击朗读](/dictall/images/read.gif)
热声系统内交变流动特性的理论分析
6) flow property
![点击朗读](/dictall/images/read.gif)
流动特性
1.
Numerical analysis on flow property of gel propellants in tapered round pipes
![点击朗读](/dictall/images/read.gif)
凝胶推进剂锥形管道流动特性数值分析
2.
In order to study the pipeline flow property of the HFC-227ea, the authors have designed the system equipment.
为进行七氟丙烷灭火剂管路流动特性的研究 ,作者设计了实际系统装置并进行测量和记录 ,图 2~图 5记述了测量结果。
3.
Taking this as basis, flow property for the CDG is researched by measuring a few of parameters such as resistance factor and residual resistanc.
在此基础上 ,从阻力系数、残余阻力系数、传输能力和流动成胶等方面对交联聚合物溶液的流动特性进行了实验研究。
补充资料:橡胶流动特性
分子式:
CAS号:
性质:橡胶的流动特性即高聚物分子运动的黏流特性。这种黏流特性具体表现在两个方面:一是胶料的黏度随温度增高而降低,这种黏度与温度的依存关系可用下式表示:黏度。式中,A为常数;E为黏流活化能;R为气体常数;T为绝对温度。二是胶料的黏度随切变速率(即加工机械速度)的增大而降低。以上两个黏流特性表明橡胶加工中胶料的加工温度与切变速度是十分重要的、需要严格控制工艺条件。还应指出,天然橡胶胶料温度对黏度的变化率小于丁苯及丁腈胶料,在加工中需注意。
CAS号:
性质:橡胶的流动特性即高聚物分子运动的黏流特性。这种黏流特性具体表现在两个方面:一是胶料的黏度随温度增高而降低,这种黏度与温度的依存关系可用下式表示:黏度。式中,A为常数;E为黏流活化能;R为气体常数;T为绝对温度。二是胶料的黏度随切变速率(即加工机械速度)的增大而降低。以上两个黏流特性表明橡胶加工中胶料的加工温度与切变速度是十分重要的、需要严格控制工艺条件。还应指出,天然橡胶胶料温度对黏度的变化率小于丁苯及丁腈胶料,在加工中需注意。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条