1) wheel load
轮压荷载
1.
Bearing stress of crane runway girders under wheel loads;
轮压荷载作用下吊车梁承压应力分析
2.
The wheel load is the main load of the rock bolt crane girder s design, but there is still no criterion for its calculation.
轮压荷载是设计中的一个主要荷载,但其确定方法目前尚无明确规范可循。
3.
The local buckling of web plates in I-girders under wheel loading has been rarely investigated, due to the unknown distribution of bearing stresses in the web plates.
目前,吊车轮压荷载作用下工字梁腹板的局部屈曲鲜有研究,这主要是由于无法得到轮压荷载作用下承压应力在腹板内的分布规律。
2) hydraulic pump gear pump load balance
液压泵齿轮泵载荷平衡
3) double-wheel load
双轮荷载
4) the loading of the tyre
轮胎载荷
1.
The article mainly talks about the problems that we must think about the directing stability of hanging machine combination,the directing stable modulus X and the relationship between the directing stable modulus and critical slope;the checking about the loading of the tyre and locating the total weight of agriculture machine implements and the general uses of hanging construction.
本文主要论述了设计悬挂式农机具时必须考虑悬挂机组的纵向稳定性,机组的纵向稳定系数X和临界坡度与纵向稳定系数的关系;轮胎载荷的校核,合理确定农机具的总重量;悬挂机构的通用性等问题。
5) flywheel load
飞轮载荷
6) cut-in load
压入载荷
1.
Through analysis it is concluded that for a given rock and given tooth profile,the cut-in displacement(depth)is in a linear relationship with cut-in load,the volume of breaking pit decreases with t.
对试验结果进行分析,得到了围压作用下对于所试验的岩石和齿形,压入载荷和压入位移成线性关系;岩石破碎坑的体积随压入载荷的增加而减小;在以相同齿形压入相同岩石的条件下,岩石的破碎面积和体积随围压的增加而减小。
补充资料：冲击波超压与动压