说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 性能增益
1)  performance gain
性能增益
2)  breeding gain
增殖增益<能>
3)  energy gain
能量增益
1.
Some physical characteristics, such as phase and group velocities of the axial optical field, and energy gain of electrons etc.
对轴上光场的相速度和群速度以及电子能量增益等物理特征作了讨论。
2.
The results show that the electron is mainly accelerated by the longitudinal ponderomotive force and the energy gain is sensitively dependent on the retarded time, initial energy and the incident angle of electron.
研究了紧聚焦的线偏振飞秒超强高斯激光脉冲俘获并剧烈加速斜入射低能相对论电子的效应,发现被俘获的电子在激光脉冲纵向有质动力的强大加速作用下,可以获得GeV量级的能量,并详细研究了入射电子的初能量、斜入射角、电子与激光脉冲的相对延迟时间和激光脉冲宽度等条件对电子能量增益的影响,发现当激光脉宽超过10λ时,脉宽对电子能量增益影响不大。
3.
Because the acceleration distance is much longer than for a initially stationary electron, the energy gain is much larger.
通过求解电子运动的相对论方程,发现预加速电子在超强超短激光脉冲的作用下可以获得很高的能量增益。
4)  add-In
增益功能
5)  wind augmentation
聚能增益
6)  gain characteristic
增益特性
1.
A new theoretical explanation for the gain characteristics of the tensile-strainedquantum well (QW) is advanced from the density-matrix theory taking into account the effects of subband-mixing on both the valance subband structures and the transition dipole moments for the first time.
在运用变形计算法计算了Ga1-xInxAs/GaInAsP/InP应变量子阱子能带结构的基础上,综合考虑了子能带耦合效应对价带子能带与跃迁矩阵元的作用及状态密度对增益线宽的影响,首次从理论上发现张应变量子阱中的TM模具有比压应变或无应变量子阱中的主模式TE模更为优异的增益特性。
2.
Novel formulas to analyze the gain characteristics of Er3+/Yb3+ co-doped waveguide amplifiers(EYCDWA)are derived from the rate equations and the light propagation equations under the uniform dopant and steady-state conditions,neglecting the amplified spontaneous emission and introducing initial energy transfer efficiency.
利用这些公式分析了泵浦光功率、信号光功率、掺杂浓度、波导长度对放大器增益特性的影响,并与单掺铒波导放大器(EDWA)进行了比较,得到了一些具有实用价值的模拟结果。
3.
Furthermore,the gain characteristic of EDF is measured and fitted with a formula derived from the qualitative explanation.
通过理论衍生的公式对增益特性曲线进行了拟合,并结合增益特性曲线对光双稳态的产生给出了定量的解释。
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条