1) electric-arc-gun
电弧炮
1.
A electric-arc-gun by utilizing the Electric-Magnetic-Forming（EMF）device as the power source was designed.
设计制作并试验研究了利用电磁成型机电源的电弧炮，k结果表明弹丸速度随电源能量的增加和熔丝质量的减少而增大。
2) electric gun
电炮
1.
High amplitude and short duration shock stimuli generated by an electric gun were used to initiate the cylindrical wedges of explosive material.
利用光纤探针/光电转换器/示波器技术和楔形炸药块方法,采取电炮驱动薄飞片冲击加载产生高压短脉冲激励的装置,测量了一种以TATB/HMX为基炸药的到爆轰距离,研究了到爆轰距离与初始冲击波压力幅值和脉宽的关系,给出了该炸药的POP曲线和表达式。
2.
By means of technique of validating copper target,the effects of materials and structure of barrel as well as of the matching relationship between the sizes of bridge foil and barrel on the integrality of the flyer driven by electric gun were studied.
利用铜靶验证法研究了加速腔材料、结构以及桥箔尺寸与加速腔尺寸的匹配关系等因素对电炮驱动飞片完整性的影响。
3.
Based on the optimized designs in capacitor,connector, flyer/foil plate and shutter,an electric gun with high performance was developed,and its inductance was reduced to 38 nH from 140 nH.
较全面地开展了电炮加载技术的实验研究,解决了低电感开关、电容器和外回路设计中的关键技术,使整个回路短路电感为38nH,接近电容器的内电感30nH,最大放电电流接近兆安。
3) arc
[英][ɑ:k] [美][ɑrk]
圆弧电弧
4) arc
[英][ɑ:k] [美][ɑrk]
弧;电弧
5) electrical arc
电弧
1.
Three kinds of electrical arc quenching models were designed for uses with 270 voltage direct current network sources.
为此 ,设计了 3种可用于 2 70V直流断路器的灭弧室模型雏形 ,通过实验和理论计算 ,研究分析了电弧运动通道对断弧效果的控制作用 。
6) arc
[英][ɑ:k] [美][ɑrk]
电弧
1.
Numerical analysis on flow field of plasma arc;
等离子焊接电弧流场数值分析
2.
Application of non-consumable gas shielded arc welding controlled by magnetic field;
磁控电弧焊接工艺在非熔化极气体保护焊中的应用
3.
Characteristics of GTAW arc in underwater welding under high-pressure air condition;
水下焊接高压空气环境下GTAW电弧特性
补充资料：2500kVA电弧炉熔炼钒铁作业(锦州铁合金厂)
2500kVA电弧炉熔炼钒铁作业(锦州铁合金厂)
2500kVA电弧炉熔炼钒铁作业(锦州铁合金厂)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条