说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 工程地质钻探
1)  engineering geological drilling
工程地质钻探
1.
Combined with the characteristic of railway engineering geological drilling ,the feasibility of applying the drilling technology with hole wall protected by mud, the availability of the mud character, the convenience of making mud, as well as the technique level of workers affected on this technology have been discussed in the paper.
结合铁路工程地质钻探的特点,对运用泥浆护壁工艺的认识、配方的适应性、配浆的便利性及工人素质等问题,谈了几点看法。
2.
Based on the experience of engineering geological drilling at Hangzhou bay bridge,this article introduces the selection of engineering geological drilling technology and platform construction methods in different sea area conditions,and sums up a set of economical,applicable,convenient and safe methods by the analysis.
结合杭州湾跨海大桥水域工程地质钻探的实践经验,介绍了不同的海域条件下钻探设备的选择和平台搭建的方法,并对杭州湾复杂海域条件下工程地质钻探施工的技术与方法进行分析,总结出了一套经济、适用、简便与安全的海域工程地质钻探方法和技术措施。
2)  Quality of Drilling Engineering
钻探工程质量
1.
Analysis of Major Factor Effecting Quality of Drilling Engineering With Analytic Hierarchy Process;
用层次分析法(AHP)分析影响钻探工程质量的主要因素
3)  drilling engineering
钻探工程
1.
Present state and countermeasures of drilling engineering technique and management for solid minerals in Guangxi Bureau of Exploration and Development of Geology and Mineral Resources are briefly analyzed in drilling equipment,technology,production management and stuff intrinsic qualifications.
从钻探设备、工艺技术、生产管理与人员素质等方面,简要分析了广西地矿局固体矿产钻探工程施工技术与管理现状,指出当前存在的突出问题以及解决这些问题的一些建议与对策。
2.
Drilling engineering was designed and carried out here to find the deep orebody, increasing 1.
在此设计并施工了钻探工程 ,找到了此深部矿体 ,新增铜铁矿石量 12 1。
4)  drilling project
钻探工程
1.
On the basic of principle of drilling project, integrating the automatically control technology, computer technology, communication technology and electric and mechanical integration technology, the automatic drilling control system is finally developed out after several times of practices and improvements.
根据钻探工程学机理,结合自动控制技术、计算机技术、通信技术、机电一体化技术,经过不断实践、改进而研究了钻进自动控制系统。
5)  engineering drilling
工程钻探
1.
Beside of devotion to drilling field, the technicians also take part in the budget for geological engineering exploration, geological survey, plotting, report compiling, proposing combination of engineering drilling and engineering geology, and enhancing degree of exploration accuracy.
简述钻探技术人员在工程地质勘察中的作用,除了做好本专业的工作之外,还要参与工程地质勘察费用预算、地质测绘与调查、图件绘制、报告编写,倡导工程钻探和工程地质学科交叉,提高勘察精度。
6)  engineering geological drilling rig
工程地质钻机
补充资料:工程地质钻探
      为进行工程地质勘察所进行的钻探工程。其目的是通过钻探取样、样品分析、现场工程地质测试,以获取建筑基础的地质资料和岩土层的各项物理、力学、化学参数,为选择修建地点,基础处理方式、建筑物类型、结构制订合理的施工方法,以及为防止滑坡、泥石流等地质灾害提供设计和施工的依据。
  
  工程地质钻探设备主要包括动力机、钻机、泥浆泵、钻杆、钻头等。钻探方法有多种,根据破碎岩土的方法可分为:冲击钻探、回转钻探、冲击回转钻探、振动钻探等。(见钻探方法)。
  
  工程地质钻孔的直径,一般根据工程要求、地质条件和钻探方法予以综合确定。为划分地层,终孔直径不宜小于33毫米;为采取原状土样,孔径不宜小于108毫米;为采取岩心试样,软质岩石不宜小于108毫米,硬质岩石不宜小于89毫米。
  
  工程地质钻探对岩心采取率有一定要求。为鉴别岩性和划分岩层,在较完整的岩层中,不宜小于80%;在破碎的岩层中,不宜小于65%。需重点研究的部位(如滑坡的滑动带),岩心采取率还应尽量提高。
  
  在工程地质钻探中,需要采取保持天然结构的土样(即原状样)。为不影响原状土样的取土质量,取土器的内径,不宜小于89毫米。取土器的入土长度,对粘性土不宜大于其直径的3倍。土试样的长度,一般为其直径的1.5~3.0倍。
  
  取土器结构可分为:根据取土器下口是否封闭,可分为敞口式和封闭式;根据取土器上部的封闭形式,可分为球阀式、活阀式和活塞式;根据取土器管壁的厚薄,可分为薄壁取土器和厚壁取土器。
  
  工程地质钻探采取原状土样的方法有击入法、压入法和振动法。
  
  击入法分为两种:①轻锤多击法。采用人力或落锤。轻锤多击法,速度及下击力不均匀,钻杆摆动大,对采取的土样有较大扰动。②重锤少击法。采用重锤少击快速将取土器击入土中,其取样质量较好,而又以重锤一次击入更好。
  
  压入法分为两种:①慢速压入法。用杠杆、千斤顶、钻机手把加压,取土器进入土层的过程是不连续的。土样有一定的扰动,但比轻锤多击法扰动小。②连续压入法。将取土器快速、均匀地压入土中。对土样的扰动程度小,是较普遍采用的方法。
  
  振动法。在高速振动作用下将取土器压入土中。对土样扰动较大,一般采用大直径的取土器。对于振动后易产生液化的土,不宜采用。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条