1) casting resin
浇注胶
2) casting polyurethane rubber
聚氨酯浇注胶
1.
The preparation of the two-component casting polyurethane rubber curing at ambient temperature for cast moulds was studied.
对室温固化铸造模用双组分聚氨酯浇注胶的制备进行了研究。
3) pouring
浇注
1.
The two 1080-m3 blast furnaces in the Ironworks successively went into operation at the end of 2005,the frontside main runner being of semi-pouring,semi-ramming mix.
莱钢炼铁厂银山前区2×1080m3高炉于2005年底相继投产,炉前主沟为半浇注、半捣打料混合主沟。
2.
HSLH serial pouring cooling feeding system can regulate mould cooling period and flexiblly choose shakeout range.
HSLH系列砂模浇注冷却输送系统,可调节铸型冷却周期,灵活选择浇注落砂区,液压传动平稳可靠,触摸屏操作PLC控制,机械手自动套箱压铁,故障自诊断。
3.
Meanwhile,this paper described many technical innovation applied to quantitative pouring unit,disk mould (assembling) machine,kick-off plate flat unit and chain plate unit design.
结合工程设计,介绍了铅阳极铸型机组的结构组成及主要技术参数,并对定量浇注装置、圆盘铸型机、取板平板装置、排板装置等技术创新作了一定的阐述。
4) casting
浇注
1.
Thermal and mechanical properties of casting polyurethane resin with heat resistance;
浇注型耐热聚氨酯树脂材料的热性能和力学性能
2.
The Study of Epoxy Resin Casting Technique for Dry-Type Transformer;
干式变压器环氧树脂浇注工艺探索
3.
To achieve the low superheat casting,a kind of cooling nozzle is developed.
为实现低过热度浇注,开发了一种冷却水口。
5) cast
浇注
1.
Application of New Binding Structure of Core Limb to Cast Dry-Type Transformer;
新型铁心柱绑扎结构在浇注型干式变压器中的应用
2.
Analysis of Environmental Protection Characteristics of Epoxy Resin Casting Dry-Type Transformer;
环氧树脂浇注干式变压器环保特性分析
3.
Cast Process of Winding in Epoxy Resin Cast Dry-Type Transformer;
环氧树脂浇注干式变压器的绕组浇注工艺
6) pour
浇注
1.
It is further proposed to pour glass glue for the sealing during the process .
针对传统的牵引电动机定子主极、换向极装配中的工艺材料缺陷,提出了采用环氧树脂和聚酰胺树脂添加H级填充泥这种新的磁极装配材料的方法,该磁极装配材料一体化程度高、密封性强,可以有效地防潮、防接地;并提出工艺实施过程浇注玻璃胶密封。
参考词条
补充资料：Sds-聚丙烯酰胺凝胶电泳凝胶电泳
sds-聚丙烯酰胺凝胶电泳（sds-page，sodium dodecyl sulfate-polyacrylamide gel electrohoresis）
在有去污剂十二烷基硫酸钠存在下的聚丙烯酰胺凝胶电泳。sds-page只是按照分子大小分离的，而不是根据分子所带的电荷和大小分离的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。