1) polytetrafluoroethylene reflectance plate
聚四氟乙烯标准板
2) TEFLON pad
聚四氟乙烯板
3) PTFE
聚四氟乙烯
1.
Fabrication and Wear Property of Electroless Co-P-PTFE Composite Coatings;
钴、磷、聚四氟乙烯复合镀层性能研究
2.
DAMAGE ANALYSES OF PTFE LINING IN CRUDE DISTILLATION COLUMN;
粗馏塔釜聚四氟乙烯衬里的破坏分析
3.
Analysis of Causes Leading to Destruction of PTFE lining in Coarse Fractionating Tower;
粗馏塔聚四氟乙烯衬里的破坏分析
4) teflon
[英]['teflɔn] [美]['tɛf'lɑn]
聚四氟乙烯
1.
Build-up spiral pipe condenser made of glass lining and teflon;
搪玻璃聚四氟乙烯组合盘管冷凝器
2.
The serviceability and development of teflon used as lubricant additive;
聚四氟乙烯润滑添加剂的使用性能与发展
3.
This paper analyzes the main causes of corrosion on boilers' gas pipelines,puts forth the measure of teflon-steel coated thermoplastic inner-cased pipe,which was implemented.
分析了造成锅炉煤气管道系统腐蚀的主要原因,提出并实施了采用聚四氟乙烯钢覆热滚塑内衬管道的解决办法。
5) polytetrafluoroethylene
[英][,pɔli,tetrə,fluərə'eθili:n] [美][,pɑli,tɛtrə,flʊro'ɛθə,lin, -,flɔr-, -,flor-]
聚四氟乙烯
1.
Effects of Fillers on the Tribological Properties of Polytetrafluoroethylene Based Composites;
填充材料对聚四氟乙烯基复合材料摩擦学特性的影响
2.
Main Moulding Products of Polytetrafluoroethylene and Their Processing Technology;
聚四氟乙烯主要成型制品及生产工艺
3.
Preparation of stretching porous polytetrafluoroethylene membrane;
聚四氟乙烯拉伸微孔膜的制备
6) poly(tetrafluoroethylene)
聚四氟乙烯
1.
In this paper,the surface modification ways of poly(tetrafluoroethylene) were introduced.
本文介绍了各种聚四氟乙烯ＰＴＥＥ膜的处理方法，以及国外近几年来采用的新方法。
2.
Polyvinylidene fluoride (PVDF) and poly(tetrafluoroethylene) (PTFE) possess excellent chemical stability and mechanical properties, they has good resistant to heat, cold, radiation and chemical corrosion and widely used as excellent membrane materials in industry for a long time, but they both have strong hydrophobicity which can cause the pollution of the membranes.
聚偏氟乙烯(PVDF)和聚四氟乙烯(PTFE)材料具有优良的化学稳定性和机械性能,能耐热、耐寒、耐辐射和耐化学腐蚀,长期以来作为优良的膜材料广泛应用于工业生产当中,但二者均有极强的疏水性,应用过程中容易造成污染,造成水通量和分离效率下降,要制备pH值敏感型微孔膜需要对其进行改性,提高其亲水性。
补充资料：聚四氟乙烯玻璃布层压板
分子式：
CAS号：
性质：是一种玻璃纤维增强材料，由无碱玻璃布作填料经聚四氟乙烯分散液浸渍、干燥、烧结后的聚四氟乙烯漆布加热加压制成。聚四氟乙烯独特的电性能使它特别适用于作高频高温的绝缘材料，可以用作雷达天线罩、电器的结构件，还可用作印刷线路的基板。
CAS号：
性质：是一种玻璃纤维增强材料，由无碱玻璃布作填料经聚四氟乙烯分散液浸渍、干燥、烧结后的聚四氟乙烯漆布加热加压制成。聚四氟乙烯独特的电性能使它特别适用于作高频高温的绝缘材料，可以用作雷达天线罩、电器的结构件，还可用作印刷线路的基板。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条