1)  CODEC
压缩/解压缩(CODEC)
2)  compression
压缩
1.
Ultrasonic Signal Compression Based on Adaptive Wavelet Thresholding;
铝合金锻件超声信号的自适应小波压缩方法
2.
Study on the compression and hardening of Triploid Populus Tomentosa lumber;
三倍体毛白杨木材压缩密实化研究
3.
Research on impact compression performance of glass fiber reinforced frictional material;
玻璃纤维增强摩擦材料冲击压缩性能研究
3)  compressive
压缩
1.
Study on dipping and compressive process of Chinese fir by PF resin;
PF树脂对杉木浸渍与压缩工艺的研究
2.
MD(molecular dynamics) method was used to simulate the tension and compression of one carbon nano-peapod,made up of one(10,10) carbon nano-tube and one 4C_(60) fullerene-chain,and,its tensile and compressive properties were analyzed by comparison with those of one(10,10) carbon-tube and one 4C_(60) fullerene-chain.
采用Tersoff势与L-J势的分子动力学(MD)方法,模拟了4C60富勒烯链/(10,10)碳管纳米豆荚(nanopeapod)的拉伸与压缩过程,并将其与(10,10)碳纳米管以及4C60富勒烯链的拉伸与压缩力学特性进行了比较。
3.
The fracture mechanisms of a fully lamellar TiAl alloy were studied by tensile tests,compressive tests and bending tests.
通过拉伸、压缩、弯曲实验分析研究了全层(FL)组织TiAl基合金的断裂机制。
4)  compress
压缩
1.
Influence of braiding parameters on the radial compressive property of regenerated peripheral nerve conduit;
编织工艺参数对周围神经再生导管径向压缩性能的影响
2.
Experimental studies on compressing chopped cotton stalks to high densities.;
切碎棉杆高密度压缩成型的试验研究
3.
Application of the supply power technique in the video compression system;
视频压缩系统中电源技术的应用
5)  compressing
压缩
1.
On a new-style channel of compressing section in tube extrusion die;
管材挤出模具新型压缩段流道的研究
2.
Construction of quasi-cyclic LDPC codes based on compressing;
压缩型QC-LDPC码的编码构造
3.
The Designation of Wood Chips Compressing and Packing and the Reserch of Stress Slackness;
木片压缩打包机设计及木片压缩应力松驰研究
6)  squeezing
压缩
1.
Entropy squeezing of the moving atom interacting with the two-mode squeezing vacuum field;
与双模压缩真空态作用的运动原子熵压缩
2.
Generation of Two-Mode Squeezing and Continuous Variable Entanglement in a Nonlinear Coupler Inside a Optical Cavity;
利用置于光腔中的非线性耦合器制备压缩和连续变量纠缠光
3.
Generation of squeezing and the quantum fluctuations at finite temperatures in a mesoscopic time-dependent capacitive coupled circuit.;
介观含时电容耦合电路中压缩的产生及其在有限温度下的量子涨落
参考词条
补充资料:电冰箱压缩机和空调器压缩机
摘要:     压缩机是制冷系统的心脏,它从吸气管吸入低温低压的制冷剂气体,通过电机运转带动活塞对其进行压缩后,向排气管排出高温高压的制冷剂气体,为制冷循环提供动力,从而实现压缩→冷凝→膨胀→蒸发(吸热)的制冷循环。压缩机一般由壳体、电动机、缸体、活塞、控制设备(启动器和热保护器)及冷却系统组成。启动器基本上有两种,即重锤式和PTC式。其中后者较为先进。冷却方式有油冷和自然冷却两种。 
       
文章内容: 
     1.概述 
      
     压缩机是制冷系统的心脏,它从吸气管吸入低温低压的制冷剂气体,通过电机运转带动活塞对其进行压缩后,向排气管排出高温高压的制冷剂气体,为制冷循环提供动力,从而实现压缩→冷凝→膨胀→蒸发(吸热)的制冷循环。压缩机一般由壳体、电动机、缸体、活塞、控制设备(启动器和热保护器)及冷却系统组成。启动器基本上有两种,即重锤式和PTC式。其中后者较为先进。冷却方式有油冷和自然冷却两种。 
      
     一般家用冰箱和空调器的压缩机是以单相交流电作为电源,它们的结构原理基本相同。冰箱压缩机功率较小,通常在250W以下。而空调器压缩机功率通常在230-900W之间。两者使用的致冷剂有所不同。 
      
     2.生产制造方法 
      
     压缩机是以流水线方式生产的。在机械加工车间(包括铸造)制造出缸体、活塞(转轴)、阀片、连杆、曲轴、端盖等零部件;在电机车间组装出转子、定子;在冲压车间制造出壳体等。然后在总装车间进行装配、焊接、清洗烘干,最后经检验合格包装出厂。大多数压缩机制造厂不生产启动器和热保护器,而是根据需要从市场采购。 
      
     3.种类 
      
     目前家用冰箱和空调器压缩机都是容积式,其中又可分为往复式和旋转式。往复式压缩机使用的是活塞、曲柄、连杆机构或活塞、曲柄、滑管机构,旋转式使用的是转轴曲轴机构。 
      
说明:补充资料仅用于学习参考,请勿用于其它任何用途。