1) EHD heat transfer model
EHD传热模型
2) EHD heat pipe
EHD热管
1.
The simulation results show that combining the EHD heat pipes and traditional PID control law together can successful.
EHD电液驱动热管的传热量可以通过改变其电极间电场强度的方法加以控制,在未来的微小卫星主动热控系统中有着广阔的应用空间,在建立起能够反映这种热控系统受控对象及冷却装置温度变化规律的动态特性模型的基础上,对受控对象内部热源功率发生扰动时EHD主动热控系统的控制效果进行了仿真分析,仿真结果表明:这种新型的EHD热管主动热控措施和经典的PI控制器相结合,可以简便、有效的完成卫星内部电子设备的温度控制任务,文中的动态特性模型为这种新型主动热控系统的设计提供了简便的数学模型。
3) heat transfer model
传热模型
1.
Study on the heat transfer model ofheat transfer process for continuous cast slabs;
连铸板坯热送过程传热模型研究
2.
The research progress of heat transfer model of the heat exchanger for ground-source heat pump;
地源热泵埋管换热器传热模型的研究进展
3.
Laplace solution for heat transfer model of dam leakage;
大坝渗漏传热模型及拉氏变换解
4) Heat-transfer model
传热模型
1.
Two-dimensional steady-state heat-transfer model of ohno continuous casting process;
热型连铸过程的二维稳态传热模型
2.
A heat-transfer model for ice-on-pipe thermal storage apparatus was established and the curve of the glycol temperature, The ice thickness and ice thermal storage rates& totals versus time was obtained when the chiller keeps full load in practical project.
建立了盘管式储冰装置的传热模型，得出了实际工程中保持机组满负荷运行工况下乙二醇进出储冰槽的温度变化曲线、盘管上冰的厚度随时间的变化曲线以及储冰槽逐时储冷量与总储冷量随时间的变化曲线，认为这些探讨有益于冰储冷装置的设计和系统的控制运行。
3.
By calculations, the characteristics of the one-dimensional steady-state heat-transfer model were described, which had been suggested on heated mould continuous casting of pure metals.
通过计算分析阐述了已有的纯金属热型连铸一维稳态传热模型的特性;在当量热导率、当量换热系数和固液界面位置一定的情况下,铸型温度与拉铸速度之间保持近似直线的关系。
5) Thermal model
传热模型
1.
Due to the complexity of thermal boundary conditions and physical features,however,thermal model solely obtained from heat analysis aspect is somehow not as precise as expected by comparison with real test data.
由于复杂的物理和边界条件,单纯从传热的角度得到的航天器传热模型与真实情况存在差别。
2.
In this paper,the development of thermal models of this structure with concise analysis was reviewed.
由于该结构的最大优点是低温差传热、蓄热性及其冷热负荷的转移能力,因此传热模型对该结构的优化设计及优化运行极为重要。
6) heat transfer model
热传导模型
1.
A heat transfer model of the contucts was put forward according to skidding characteristics of friction sheets and heat transfer theory.
根据摩擦片打滑的特点和导热理论 ,建立了接触点处的热传导模型 ,依该模型分析了接触区域温度分布的特点 ,得知温度沿材料厚度方向呈线性分布 ,接触点瞬时温度与单位面积摩滑功率和打滑时间成正比。
2.
The influences of heat transfer model and variation of roll temperature on calculated result were analyzed.
采用弹塑性大变形热力耦合有限元法研究了钢板热轧过程，侧重计算轧件厚向温度分布，并分析了热传导模型、轧辊温度变化对计算结果的影响。
3.
The heat transfer model of a micro Direct Methanol Fuel Cell (μDMFC) based on heat transfer mechanisms is presented.
根据各种传热机理建立了微型直接甲醇燃料电池的热传导模型,借助有限元分析工具,设计模拟了集成在微型直接甲醇燃料电池中3种不同结构的加热器。
补充资料：传热
分子式：
CAS号：
性质：见热传递
CAS号：
性质：见热传递
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条