3) Closed-field unbalanced magnetron sputtering
闭合场非平衡磁控溅射
1.
Closed-field unbalanced magnetron sputtering (CFUBMS) and 90° bend toroidal duct magnetic filtered cathodic vacuum arc (FCVA) were chosen to prepare DLC films for they are the better deposition technologies for industrial application, and the influences of deposition parameters on the structures and properties were investigated.
采用了闭合场非平衡磁控溅射和90°弯管磁过滤阴极弧两种适合产业化的技术,在单晶硅基体上沉积DLC膜,研究了工艺参数对DLC膜的结构和性能的影响。
4) unbalanced magnetron sputter ion plating technique
非平衡磁控溅射离子镀技术
1.
A series of CrTiAlN hard gradient coatings were produced using the closed field unbalanced magnetron sputter ion plating technique on M2 high speed steel and Si substrates with substrate bias voltage changing,and the friction and wear properties were studied.
应用闭合场非平衡磁控溅射离子镀技术在高速钢和单晶硅基体上制备了一组随基体偏压变化的CrTiAlN梯度镀层,并测试了其摩擦学性能。
5) closed field unbalanced magnetron sputter iron plating
非平衡闭合磁控溅射
1.
The graphite-like composite coatings were deposited using closed field unbalanced magnetron sputter iron plating technique.
使用非平衡闭合磁控溅射技术制备了类石墨复合镀层,采用SEM、AFM观察了不同渗碳淬火基片不同表面状态类石墨复合膜表面和断口形貌,采用XRD分析了镀层的相结构。
6) magnetron sputter ion plating
磁控溅射离子镀
1.
Electrochemical corrosion behaviors of depleted uranium coated with niobium deposited by magnetron sputter ion plating were studied by electrochemical technology, scanning electron microscope (SEM) and X–ray energy dispersive spectroscope (EDS).
利用电化学测试技术、扫描电镜(SEM)及X射线能谱(EDS)对磁控溅射离子镀铌贫铀的电化学腐蚀行为进行了研究。
2.
An experiment of depositing TiN coating on the surface of HSS W18Cr4V by magnetron sputter ion plating (MSIP) method was carried out.
采用磁控溅射离子镀法(MSIP)对高速钢W18Cr4V进行了TiN镀膜试验,对镀膜后试样的各项性能进行了测试分析,并对溅射时间、氮分压、溅射电流等工艺参数对TiN膜层的显微组织、厚度、硬度和耐磨性的影响进行了研究,确定了可获得最佳涂层综合性能的镀膜工艺参数。
3.
By using the physical vapor deposition(PVD) coating technology of closed field unbalance magnetron sputter ion plating(CFUBMSIP),the high-speed steel(HSS) twist drills with graded CrAlTiN coatings are made.
用闭合场非平衡磁控溅射离子镀PVD涂层工艺在高速钢麻花钻上沉积了CrA lTiN梯度涂层。
补充资料：离子镀
分子式：
CAS号：
性质：镀料和镀件置于真空室中，在一定真空度下从针形阀通入惰性气体(通常为氩气)，使真空度保持在0.1～1Pa。接通负高压，使蒸发源(镀料；阳极)和镀件(阴极)之间放电，建立低压气体放电的等离子区和阴极区。然后将蒸发源通电加热，使镀料金属气化进入等离子区。在高速电子轰击下，金属气体一部分被电离并在电场作用下被加速，射在镀件表面而形成镀层。离子镀的主要特点是镀层均匀，附着力好，可用于装饰、表面硬化、电子元器件用的金属或化合物镀层、光学用镀层等。
CAS号：
性质：镀料和镀件置于真空室中，在一定真空度下从针形阀通入惰性气体(通常为氩气)，使真空度保持在0.1～1Pa。接通负高压，使蒸发源(镀料；阳极)和镀件(阴极)之间放电，建立低压气体放电的等离子区和阴极区。然后将蒸发源通电加热，使镀料金属气化进入等离子区。在高速电子轰击下，金属气体一部分被电离并在电场作用下被加速，射在镀件表面而形成镀层。离子镀的主要特点是镀层均匀，附着力好，可用于装饰、表面硬化、电子元器件用的金属或化合物镀层、光学用镀层等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条