1) Solidification Equipment
凝固端
1.
Research and Design on Solidification Equipment and Drawing Control of Horizontal Continuous Caster;
铸铁水平连铸机凝固端及牵引控制设计研究与实验
3) F-EMS
凝固末端电磁搅拌
1.
Effects on 77B Cast Slab Center Segregation of F-EMS
凝固末端电磁搅拌对77B铸坯中心偏析的影响
2.
The distribution of electromagnetic fields of F-EMS was simulated by ANSYS 10.
利用ANSYS软件对160 mm×160 mm小方坯凝固末端电磁搅拌器所产生的电磁场分布进行了模拟。
4) coagulation
[英][kəu'ægju'leiʃən] [美][koægjə'leʃən]
凝固
1.
The effect of different coagulation methods on the mechanical properties of skin rubber;
凝固方法对胶清橡胶力学性能的影响
2.
Study on the coagulation of natural rubber using surfactant and calcium as the coagulant;
表面活性剂和CaCl_2作凝固剂凝固天然胶乳的研究
3.
Effect of coagulation and drawing condition on structure and morphology of PAN fiber;
凝固与拉伸条件对PAN纤维结构形态的影响
5) solidify
[英][sə'lɪdɪfaɪ] [美][sə'lɪdə'faɪ]
凝固
1.
By this model the time required for casting pipe solidification,thickness of solidifying layer,solidification depth and the difference of solidification rate between inner and outer walls can all be.
通过理论推导，建立了连续铸铁管凝固过程传热微分方程，用差分法求解取得了满意结果，最后用最小二乘回归求出固液界面的等温线方程。
2.
By researching the influence of copper plate shape,copper plate coming,,cooling structure of funnel mould on the solidify of thin slab and the heat transfer of mould,we analyzed the productive adaptability of H~2 funnel mould of Danieli,and optimized the shape of mould copper plate.
通过研究漏斗型结晶器的铜板形状、镀层、冷却结构对薄板坯凝固过程和结晶器传热的影响,分析了达涅利 H~2漏斗型结晶器生产应用的适应性,并据此对结晶器宽面、窄面铜板形状进行了优化。
6) solidification
[英][sə,lidifi'keiʃən] [美][sə,lɪdəfə'keʃən]
凝固
1.
Flow and Solidification of Copper Thin-slab in Horizontal Continuous Casting with Electromagnetic Stirring;
铜板带水平连铸电磁搅拌中熔体的流动和凝固
2.
Quantitative relationship between secondary dendrite arm spacing and solidification cooling rate of AZ31 magnesium alloy;
AZ31镁合金的凝固冷却速率与二次枝晶间距的定量关系
3.
Study on the Solidification Behavior of Steel in the Mold of Thin Slab Caster;
薄板坯连铸结晶器内钢液凝固行为的研究
补充资料：迟延凝固剂
分子式：
CAS号：
性质：又称胶凝剂。加入胶乳中，能使胶乳从液态转变为均匀的半刚性固体凝胶，而且保持原有形状及大小的物质。迟延凝固剂常用的有硅氟化钠，碱性的钛、锆与硼的氟化物等。多用于胶乳泡沫制品的加工，以氟硅酸盐(如氟硅酸钠、氟硅酸钾)的应用最为普遍。
CAS号：
性质：又称胶凝剂。加入胶乳中，能使胶乳从液态转变为均匀的半刚性固体凝胶，而且保持原有形状及大小的物质。迟延凝固剂常用的有硅氟化钠，碱性的钛、锆与硼的氟化物等。多用于胶乳泡沫制品的加工，以氟硅酸盐(如氟硅酸钠、氟硅酸钾)的应用最为普遍。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条