1) silicide ceramics
硅化物陶瓷
2) silicon-based non-oxide ceramics
硅基非氧化物陶瓷
3) silicon nitride ceramics
氮化硅陶瓷
1.
As a new type tool material, the excellent capabilities of silicon nitride ceramics cutting tools ravel out many cutting problems of super hard materials.
氮化硅陶瓷是一种新型刀具材料,其优良的切削性能解决了超硬材料的加工难题。
2.
The dielectric property of silicon nitride ceramics was measured at 10.
通过添加烧结助剂,采用常压烧结工艺制备出不同气孔率(19%～54%)的氮化硅陶瓷。
3.
Silicon nitride ceramics is a sort of material of high temperature and high intensity structure which have been developed since 1950s.
氮化硅陶瓷是50年代发展起来的一种高温高强结构材料,由于其优异的高温力学性能和化学稳定性,在现代制造业中发挥着越来越重要的作用。
4) silicon nitride ceramic
氮化硅陶瓷
1.
However,it is difficult to make silicon nitride ceramic parts.
氮化硅作为高温功能陶瓷性能优越,但将其制备成陶瓷零件比较困难,目前一般用反应烧结法制备氮化硅陶瓷零件。
2.
In the paper, the dispersion of nano-Si3N4 powder, the influence of different nano-Si3N4 concentration on silicon nitride mechanical properties, the influence of the different nano-Si3N4 concentration on silicon nitride ceramic using properties, th.
本文以亚微米级氮化硅为起始原料,加入纳米氮化硅来增强基体,添加氧化铝和氧化钇为烧结助剂,等静压成型,采用无压烧结的方式来制备具有优良性能的氮化硅陶瓷。
3.
In this paper, the influence of sintering technology on the microstructure and mechanical properties of the silicon nitride ceramic were studied.
研究了烧结技术对氮化硅陶瓷显微结构和力学性能的影响。
5) silicon carbide ceramic
碳化硅陶瓷
1.
Microstructure observation on corrosion behavior of liquid phase sintered silicon carbide ceramics
液相烧结碳化硅陶瓷腐蚀行为的显微观察
2.
The silicon carbide ceramic obtained by pyrolyzing the polyferrocarbosilane has some magnetic properties because of the formation of Fe_3Si characterized by XRD.
采用低分子量的聚硅烷(LPS)与二茂铁合成聚铁碳硅烷(PFCS),后者经高温烧成可制得磁性碳化硅陶瓷,XRD分析表明碳化硅陶瓷具有磁性的原因是由于生成了Fe3Si。
3.
Reaction bonded silicon carbide ceramic materials has many excellent performance, such as high-temperature oxidation resistance, corrosion resistance, resistance to wear and tear, heat shock resistance, which make it become one of the most effective methods of silicon carbide preparation.
反应烧结碳化硅陶瓷材料具有优良的抗高温氧化、耐腐蚀、耐磨损、抗热冲击等性能,使反应烧结成为制备碳化硅材料最有效的方法。
6) silicon nitride
氮化硅陶瓷
1.
Hard and wear-resistant titanium nitride coatings were deposited by pulsed high energy density plasma technique on silicon nitride ceramic cutting tools at ambient temperature.
用高能量密度脉冲等离子体于室温下在氮化硅陶瓷刀具上成功沉积了高硬耐磨的氮化钛涂层。
2.
The effect of holding time on intergranular phase and mechanical property of GPS silicon nitride ceramics was studied.
研究了保温时间对气压烧结(GPS)氮化硅陶瓷晶界相及力学性能的影响。
补充资料：硅化物陶瓷
分子式：
CAS号：
性质：硅和钼、钨、钽等难熔硅化物为主要成分的陶瓷。按结构特征可分为两类：一类是具有金属结构的相，硅原子置换金属原子时晶格类型不变。另一类是复杂结构的硅化物。一般硅与金属形成的化合物熔点低、硬度低，在高温下易发生蠕变。只有钼、钨、钽的硅化物熔点超过2000℃，并具有优良的高温抗氧化性能。可采用钼、钨、钽金属与硅直接化合法、上述金属氧化物的碳还原法、铝热还原法和气相沉积法等制取钼、钨、钽的硅化物粉末。然后按特种陶瓷工艺在氮气等保护气氛下烧结成陶瓷制品。主要用作高温电热元件、热交换器和某些高温零部件。
CAS号：
性质：硅和钼、钨、钽等难熔硅化物为主要成分的陶瓷。按结构特征可分为两类：一类是具有金属结构的相，硅原子置换金属原子时晶格类型不变。另一类是复杂结构的硅化物。一般硅与金属形成的化合物熔点低、硬度低，在高温下易发生蠕变。只有钼、钨、钽的硅化物熔点超过2000℃，并具有优良的高温抗氧化性能。可采用钼、钨、钽金属与硅直接化合法、上述金属氧化物的碳还原法、铝热还原法和气相沉积法等制取钼、钨、钽的硅化物粉末。然后按特种陶瓷工艺在氮气等保护气氛下烧结成陶瓷制品。主要用作高温电热元件、热交换器和某些高温零部件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条